Part Number: LMK1C1104 Hi team,
customer want to use this on UFS storage application,
can LMK1C1104 still function when VDD is 1.2V, I only see 1.8V in datasheet.
if not, can you recommend other solution that can do,
Regards,
Fred
Part Number: LMK1C1104 To whom it may concern,
Does the continuous output current rating for the LMK1C1104DQFR refer to all outputs or each output?
Thank you,
D
Part Number: LMK1C1104 Hi，
Our circuit used LMK1C1104 devices. Our processor requires three 50MHz CMOS clocks at 1.8V. The design is as follows. Please help to check whether there is any problem with this design. Thank you very much.
Part Number: LMK1C1104 Hi Team，
During the test, the customer found that the rise and fall time of the 125MHz clock output by the LMK1C1104 is long, about 1ns. Could you please help support the following requests and questions:
1. From the DS, when…
Part Number: LMK1C1104 Hi,
I would like to check the spec of output impedance. Is Rout (50ohm) embedded in output of buffer or it is required for measurement only? And do you know the driving capability of 1104? Many thanks.
Part Number: LMK1C1104 Other Parts Discussed in Thread: CDCLVC1104 , Hi,
I'm looking at LMK1C1104 to replace CDCLVC1104. I have two basic questions regarding termination.
1. The same receiver can be terminated with 50ohm like Figure 8-2 while…
Part Number: LMK1C1104 Other Parts Discussed in Thread: DP83869HM , , LMK1C1108 Hi Everyone,
Clocking Architecture for DP83869HM Ethernet PHY:
In my design I have 14 Ethernet Interfaces. 10 was configured as 1000BASE-T and 4 was 100BASE-TX.
…
Part Number: LMK1C1104 Hi
The clock buffer LMK1C1104DQFT has a absolute maximum rating of 3.6V on VDD pin. For 10% derating, i.e at 90% rated voltage operation,this IC fails.
3.3V/3.6V = 0.916 = 91.6%.Kindly let us know if the absolute maximum voltage…
