Part Number: LMK1D1204 Other Parts Discussed in Thread: LMK1D1208 Hi,
In the datasheet for the LMK1D120x family of devices, there is the current consumption vs frequency graph of the LMK1D1208 and I saw the comment that the LMK1D1204 follows a similar…
Part Number: LMK1D1204 Other Parts Discussed in Thread: LMK1D1208 , Hello,
Can you help share the preferred input layout of discretes/terminations to the LMK1D1205 device? Thanks, Zack
Part Number: LMK1D1204 I am testing the LMK1D1204 LVDS clock buffer on a breadboard to determine if it will work with a design. I am using a VDD of 3.3V and inputting a differential clock signal from 0-2V yet the output is at a 0.5V steady state before…
Part Number: LMK1D1204 Other Parts Discussed in Thread: LMK00334 , CDCDB400 Hello,
I need to split one PCIE3 clock of one 8 lanes bus to two clocks each for 4 lanes bus.
Can LMK1D1204 be used in order to split PCIE clock to 2 clocks ?
I'm asking that…
Part Number: LMK1D1204 Other Parts Discussed in Thread: LMK1D2102 , CDCE6214 hi,
customer is searching a clock buffer with below retirements. any suggestions?
supply voltag:1.8v;
Input signal : single-end 125Mhz LVCMOS;
Output signal: differential…
Part Number: LMK1D1204 Other Parts Discussed in Thread: LMK1D1208
Hi team,
Do you have information on the via pattern of the LMK1D1204?
The LMK1D120x datasheet contains via pattern information for the LMK1D1208, but it seems that the LMK1D1204 does not…
Part Number: LMK1D1204 Hello,
I am running the input SI simulation for the LMK1D1204 as shown in Figure 8-4 in the datasheet. The driver is an LVDS driver with 50ohm termination to VAC_REF after the blocking caps. When running a TDR measurement I am seeing…
Part Number: LMK1D1204 Can I input a 500mhz single ended clock if I reduce the voltage to less than 2V and bias the negative input to 1/2 the input range so it looks like a psudo differential?
The datasheet says single ended max input is only 250mhz. …
