Search tips
Showing 59 results View by: Thread Post Sort by
    Answered

  • LMK5C33216: How to realize the hitless switching in LMK5C33216

    Resolved
    Part Number: LMK5C33216 Other Parts Discussed in Thread: LMK04906 Hi Team, LMK5C33216 datasheet mentioned that can realize hitless switching between two ref input. So I have several questions about it. 1. Does the hitless switching function is unique…
    • Resolved
    • Answered

  • LMK5C33216: PLL programming

    Resolved
    Part Number: LMK5C33216 Hello, I'm using APLL1 and APLL2 of the LMK5C33216 for different clocks to FPGA's and data converters. If PLL2 is reprogrammed to change the output configuration/dividers, etc, will this cause any interruption in the PLL1…
    • Resolved

  • LMK5C33216: ChanDiv Static Offset

    TI Thinks Resolved
    Part Number: LMK5C33216 Hello, I have a clarification on the CLK2/3 and 14/15 of the LMK5C33216. I understand that there is no SYSREF generation on those clock groups. I do see there is “OUT3 ChanDiv Static Offset. Static offset code which delays the…

  • LMK5C33216: Disable output command

    TI Thinks Resolved
    Part Number: LMK5C33216 Hi Team, I want to disable the OUT14 LVDS output. When I using the TICS pro to check the command and I have below questions: 1. Why 0x4E2 will be written twice? 2. Why 0x361 will rewrite the default value. Register address …

  • LMK5C33216: Current by pin

    TI Thinks Resolved
    Part Number: LMK5C33216 Hello, Do you have data for the expected current (even in the CFG1 from the datasheet) for the VDD_DIG, VDD_APLL1_XO, VDD_APlL2, VDD_APLL3, VDD_IN0, VDD_IN1, AND THE VDDO PINS? Table 7.5 gives total supply current. I'd like to…
    • Answered

  • LMK5C33216: Start up clocks

    Resolved
    Part Number: LMK5C33216 Hello, There are two ROM startup conditions that are available. However, these both assume a 10 MHz at IN1 and XO= 38.88 MHz. What are the outputs doing if IN1 is unconnected and XO input is 100 MHz? What output frequencies are…
    • Resolved
    • Answered

  • LMK5C33216: LMK5C32216 EEPROM Programming

    Resolved
    Part Number: LMK5C33216 I'm looking at the LMK5C33216 and using the EEPROM as a power on configuration. I don't see anywhere in the datasheet that this would be a orderable part number or if there was a way to program the EEPROM? Thanks, Jo…
    • Resolved

  • LMK5C33216: require datasheet of LMK5B33216

    TI Thinks Resolved
    Part Number: LMK5C33216 For mpn LMK5B33216RGCT we needed Datasheet, marking engraved on part its MSL value and also pin 1 orientation after getting placed in tape and reel. Also, i find LMK5C33216 on TI website, what`s the different between this two part…

  • LMK5C33216: Delay tuning

    TI Thinks Resolved
    Part Number: LMK5C33216 Hi E2E, Good day. Our customer would like to use the LMK5C33216 for a MIMO application. What degree is this part capable of aligning all the outputs to one another? Specifically, what is the range of delay capable, and what is the…

  • RE: LMK5B33414: Program through Linux application

    Hi Karthick, Can you please provide your .tcs file? I would like to know which TICSPRO profile you are using. We have timing diagrams in the LMK5C33216 datasheet. You can export the register dump from TICSPRO and program the registers through SPI. …

Didn't find what you are looking for? Post a new question.