Part Number: LMK5C33216EVM I want to generate a certain clock frequency and in the process, I encountered some issues. I used the attached config files to configure the LMK in TICS Pro. After loading the config file and reading back the status bits, I…
Part Number: LMK5C33216EVM Other Parts Discussed in Thread: LMK5C33216 Hello there,
I am trying to find if LMK5C33216 can be used for our requirements:
1. with 100MHz reference input
2. 750 MHz CLK output (from VCO1)
3. 800MHz CLK output (from…
Part Number: LMK5C33216EVM when I got the board, it transmit clocks that I don't set on some outputs
I go through the start page and nothing changed
after I wrote the EPROM, all output stopped working
I try to set it on I2C and SPI, but it looks…
Part Number: LMK5C33216EVM Hi
I got the Evaluation board and go with the reference guide, but on the last step (run script)
it return that it doesn't have Matlab
what should I do
Dror Ben Shlomo
AST&Sicence
Hi Timothy,
the delays are no problem: I have been on holidays.You find my new remarks / questions below in green, whereas I marked your response in red. I hope this improves the readability.
Hello Thorsten,
Sorry for the delays... but I'll also need…
Hello Jennifer,
We have ordered LMK5C33216EVM, yesterday (ti.com).
After testing, I would integrate the clock synchronizer in a board. I should finish the board schematic at the end of january.
I think we will ask to replace the LMK5C33216EVM with an…
Hi Riley,
I am able to set R21 using the TICS Pro software on a the LMK5C33216EVM dev board. However, when I try to do the equivalent register write on my target circuit board, I have not been able to write 0x40 to R21.
Would there be any other registers…
Update: For debugging, I am now using the TICS Pro software with the LMK5C33216EVM (this is my first time using TICS Pro). I have tried programming the i2c address on the evaluation board, but I am also seeing R18 stuck at the value 0x19.
How can I us…