Part Number: LMK62I0-100M Other Parts Discussed in Thread: LMK61E2EVM This question regards the OE pin on this device.
In page 3 of DS pin 1 is described:
"Outputenable(internalpullup).Whensettolow,outputpairisdisabledandsetathigh impedance."…
Other Parts Discussed in Thread: LMK61E2EVM , CODELOADER , LMK61E2 We have three LMK61E2EVM modules whose outputs have simply gone flat after programming with the CodeLoader4 software. We are using the modules hooked up to a Xilinx KC705 board, specifically…
Part Number: LMK61E2EVM Other Parts Discussed in Thread: CODELOADER , , LMK61E2 Dear Tech Support and Community Members:
We bought a LMK61E2 EVM, and tried to connect to USB and use the CodeLoader software. The USB port communicates with the eval board…
Part Number: LMK61E2EVM Other Parts Discussed in Thread: CODELOADER , USB2ANY , , LMK61E2 I want to use CodeLoader 4 to evaluate and program the LMK61E2 oscillator. Does the LMK61E2EVM contain the USB2ANY HPA665 interface? According to the on-line manual…
Other Parts Discussed in Thread: LMK61E2EVM , CODELOADER Hi, I am using LMK61E2EVM and I am getting an error "No Device Found!!" when I launch the CodeLoader 4 GUI and try to find the I2C address. I am seeing D3 solid green and D3 flashing green…
Part Number: LMX2595EVM Other Parts Discussed in Thread: LMK61E2EVM , LMX2595 , We have a LMX2595 EVM with LMK61E2EVM for controlling and input ref clk
Recently we had some issues with LMX2595EVM working , so replaced the LMX2595 chip on the this board,…
Hi Di,
I tested this on the LMK61E2EVM at ~100 MHz and I didn't notice any significant difference in phase noise between the two configurations. If you have some register profiles available I can test those on the EVM as well. The device will have…
Hi Amin,
In my opinion, you have not yet answered one question:
This sounds good. In the following topic, your colleague Noel Fung says its always possible to work with TICSpro and the evalboard LMK61E2EVM . Can you confirm this?
Okay let me figure out…
Part Number: CODELOADER Other Parts Discussed in Thread: LMK61E2EVM , USB2ANY Hello, Can it program onboard USB interface?For example, can I program LMK61E2EVM without a USB2ANY? Thank you!
