Part Number: LMP2232 Other Parts Discussed in Thread: OPA2196 , LMP2231 I has asked about alternates for an LT2078CS8 and the LMP2232 was suggested, but the max supply voltage is shown as 6V.
Safe to assume that +5V and -5V rails would be out of spec? …
Part Number: LMP2232 Hi Team, Our customer intends to use the LMP2232 as an input buffer for a high-impedance electrode. The datasheet specifies the impedance as high, but unfortunately it didn't provide discrete values. Our customer would like to know…
Part Number: LMP2232 Other Parts Discussed in Thread: TINA-TI , Tool/software: TINA-TI or Spice Models I am using TINA TI to model a circuit. I want to place a dual op-amp and keep the pin structure for the dual. When I place a LMP2232 (dual device) the…
Part Number: LMP2232 Other Parts Discussed in Thread: OPA188 , LMP2234 , LMP2231 , Hi TI Experts,
Can you tell me if this amplifier LMP223x is auto-zero device implementing a chopper scheme?
We have a customer designing a noise sensitive sensor, and would…
Part Number: LMP2232 Hi team
The supply current in the datasheet is for single channel or dual? e.g. 17uA(typ) at 3.3V is for dual?
Regards,
Noriyuki Takahashi
Other Parts Discussed in Thread: LMP2232 , LMP2231 Hello, all
Now we have one inquiry regarding Output Current on LMP2232 from our customer.
Please refer to the item below, and feedback us with your comment.
When referring page 3 of LMP2232, the output current…
Other Parts Discussed in Thread: LMP2232 I'm using a LMP2232 as a buffer to monitor 2 28vdc signals. The device has failed and with no input 1 channel has 1.5v on the output and the other channel has 0.13v.
Both circuits consists on a 10:1 voltage…
At outset you are all fantastic. Thank you so much all of you for taking time to help me out even though I am a total newbie. The only thing that worries me about OPA2335 availability in future.
This part is already low in stock with the distributors…
Other Parts Discussed in Thread: LMP2232 One of my customers is using them LMP2232 in a bridge sensor design. The bridge impedance is approximately 10K ohms with a 3.3V excitation voltage. LMP2232 has a nominal 3.3V V+ rail.
Concern - The design will have…
Part Number: LMC6082 Other Parts Discussed in Thread: LMP91000 , LMC6081 , , LMC6482 , LMP2232 , LMC6492 Dear Forum,
I am currently trying to design a dissolved oxygen device using a 2-wire polarographic probe. The max output of this probe is roughly 40-80…
