Part Number: LMP8278Q-Q1 Other Parts Discussed in Thread: INA310A Tool/software: Hello ,
In our application we want to sense load over-current which is higher than normal current measurement range.
We have plan of taking current sense output at A1…
Part Number: LMP8278Q-Q1 Hi ,
I am simulating with the PSPICE imported model of LMP8278Q-Q1 in ORCAD. The simulation gives an error and aborted
I get the following error
ERROR(ORPSIM-16363): Command invalid in subcircuit ----$ ERROR(ORPSIM-16499…
Part Number: LMP8278Q-Q1 Other Parts Discussed in Thread: INA271 Hi Team,
LMP8278Q-Q1 is evaluated in customer site. We want to use LMP8278Q-Q1 to replace AD8208. For the fist stage gain, LMP8278Q-Q1 is 7, AD8208 is 10.
Do we have same amplifier like…
Part Number: LMP8278Q-Q1 Hi team
LMP8278Q-Q1 D/S say Input bias current = around 140uA at Vcm = 20V on Figure 4.
so total input bias current would be Max 280uA(= 140uA x 2) for two input pins ?
further, may I know total input bias current for two…
Part Number: INA270 Other Parts Discussed in Thread: LMP8278Q-Q1 , INA138 , LMP8645 Hi team, My customer is currently using the AD8208 for high-side current sensing and feeding its output into a 5V microcontroller. However, they are planning to switch…
Dear Paul,
the continuous input voltage specified is not common mode voltage, but in fact the maximum voltage that can be seen at either pin before causing damage, i.e., a summation of both common mode and differential mode voltages. You'll need to…
