Part Number: LMV324-N-Q1 Tool/software: I was introduced by the TI support center team to have specifc answer for below questions for the art number LMV324Q1MTX.
After we receives this device from TI,
How long we can store this part in our warehouse…
Part Number: LM324LV Other Parts Discussed in Thread: LMV324A , LMV324 , LMV324-N , TINA-TI , TLV9004 Hello team,
I have question about full swing output voltage with open-loop. The our evaluated schematics is using V+=5V,V-=GND, Load =about 20Kohm…
Hello Hank,
I've re-run Kai's simulations from 1Ohm to 100Ohms and, while the higher resistor values show better phase performance at 100Hz to 10kHz, I don't think this is enough to justify having output oscillation up to 90Ohms. I would recommend you…
Wang Mike,
It is PNP as shown in the device schematic in the data sheet.
For LMV324 (not LMV324-N) there are no preconditions for Vos other than supply voltage (2.7V, 5V) that surrounds 3.3V so I'll skip CMRR, Av, and PSRR
VOUT = VBIAS + [Vos +…
Hello,
the flame comes directily from the IC, next to the edge where the both VS pins are connected to the package. The Thermal Pad is connected to ground. And here is the schematic: 20180528_Sch1.pdf
Hi Yannick,
60mA is the short circuit current, when the output voltage is broken down to 0V. This current cannot be used for driving a LED.
Have a look at figure 14 of datasheet to see how the output voltage of LMV358 changes with the output current…
Ross,
The LMV324 was designed to have the same performance as LMV324-N as same data sheet specifications.However they are not same silicon.
Either would work in a properly designed circuit .
Other Parts Discussed in Thread: LM324 , LM324-N , LMV324 , LMV324-N Hello,
My customer used LM324NS-M,SD.
And this device is already obsoleted.
Thus, I will introduce replacement device.
Could you please kindly send datasheet of LM324NS-M…
