Other Parts Discussed in Thread: LM2904 , LMV341 , TLV9001 , TINA-TI Dear Dharmesh Joshi , Ron Michallick , team,
Background: We have a need to build a circuit to read Conductivity/EC measurements.
We have referenced your earlier discussion on related…
Part Number: LMV341-Q1 Other Parts Discussed in Thread: LMV341 Hey Team,
Simple question - I don't see an automotive dual channel version of the LMV341. What would the closest device to the LMV341 that would be in a dual package?
Best, Dajon McGi…
Part Number: LMV341-Q1 Other Parts Discussed in Thread: TINA-TI Hi team,
Do you have "settling time" spec? If no, could you tell me how to calculate or estimate it from datasheet spec and external Cload value? I found that TLV9061S-Q1 has this spec…
Part Number: LMV341 Other Parts Discussed in Thread: LMV641 , , OPA314 Hi, Team
Can we have any EMIRR data for LMV341 and LMV641 ?
<< Background >>
Our customer has been working on LMV341/641 and these devices was not able to achieve the test…
Part Number: LMV341 Hi Team,
Customer changed from LMV 342 to LMV 341.
The input terminal (+) potential was 200 mV and the input terminal (-) was 150 mV.
In the case of LMV 342, the input terminal (-) was also 200 mV.
I would like to know the…
Hayashi-san,
LMV341-Q1 is based on LMV341 device (not LMV341-N device). LMV341 data sheet describes the pins better in AMR table.
No pin can be more negative than -0.3V (relative to GND pin)
Input pins (including SD pin) can be as high as 5.5V regardless…
Part Number: LMV341 Hello,
We purchased the reference LMV341IDBVR which, per datasheet, has a marking range as follows: (RC9A ~ RC9E).
The material we received has TI label with correct reference and all, but the component body marking is RC9S.…
Part Number: LMV341-Q1 Hi all,
I would like the offset voltage vs common-mode voltage in wider range of Y-axis? I would like to use that in order to expect the input swing voltage.
Best regards, RYO
Part Number: LMV341 When in shutdown, do the inputs remain high impedance? I'm going to use it as a follower but I can't load the source when it is shut down..
Part Number: LMV341-Q1 Hi TI-team
My customer want to know the state at the time of shutdown.
Please teach me the state (High / Lo / Hi-z) of IN +, IN-, OUT terminal when the shutdown function is turned ON (SHDN = L).
If Hi-z, what ohm is it ? …
