Hey Prafulla,
Was this issue resolved? I will go ahead and mark Kai's response as "TI Thinks Resolved."
If the issue was not resolved, please let us know how we may further assist.
All the best, Carolina
Part Number: LMV601 Hello,
We use the LMV601 as an amplifier for signal coming from a pH probe.
When soldered by hand on our prototypes, it works great. However when it comes out from our desktop reflow oven, the impedance is too low to handle correctly…
Other Parts Discussed in Thread: LMV601 , TLV521 , TLV3691 Dear Team,
May I check with you that LMV601 is suitable as comparator application and TLV521 is not since it has input clamping diodes?
Thank you.
Regards,
Ting
Dear Vladimir Naumenkov, Do you have a general idea of the approximate capacitive load connected to the output of DA2? Such load would be the parasitic capacitance between the GND1 and the lower node of R2. If the capacitive load is relatively small, then…
Other Parts Discussed in Thread: LMC8101 , OPA2341 , LMC6001 , LPV521 , LPV531 , LMC6442 , LMV341-N , LMV601 Hello,
I am using LMC6572 op amps, and need to maintain low input current ( <1pA) even when the circuit is not powered. As it is now, current flows…
Other Parts Discussed in Thread: OPA140 , OPA1662 , OPA2134 , OPA322 , LMV601 , OPA134 Hi everyone, I'm studying in deep a circuit I've found in a TechNote of Texas Instruments(amplifier for electret microphone) for my "Sensors and Transducers" examination…
