James,
James Dupre said: discretized levels
This type of noise could be popcorn noise. This noise is also called burst noise and random telegraph signals (RTS). This type of noise is somewhat rare to very rare. What percentage of samples have this…
Part Number: LMV712-N Other Parts Discussed in Thread: LMV712 Tool/software: Hi, I'm struggling to understand the behavior of the LMV712TL/NOPB in various application. When it's configured as a non-inverting amplifier with 101x gain, the output dithers…
Other Parts Discussed in Thread: LMV712-N , TINA-TI , LMV712-N-Q1 , LMV712 Dear all,
We would like to phase simulation by TINA-TI about LMV712-N-Q1 (or LMV712-N).
We installed TINA-TI (Version 9.3.150.4 SF-TI), but there was not this Amp at SPICE…
Other Parts Discussed in Thread: LPV542 , LMV712-N hi:
When one amplifier unit of LPV542 or LMV712-N is used as a voltage follower, the positive phase input of the unit is hung in the air, then the level of the output terminal is low or high? Or not…
Dear all,
Could you teach me about VSD of 'on mode' and 'shutdown mode' at page 10?
I would like to know how to read this characteristic.
Why is '4.5V' minimum at on mode in spite of '3.5V' being typical value?
And why is '0.8V' maximum at…
Hello Charles,
The LMV710-N, LMV712-N and LMV881 have outputs that short to ground when the shutdown pin is enabled (in shutdown). They and do not have input diode clamps.
However, I do not know if the output is pulled low when the the power is…
Hello Atsushi,
The equivalent graph to AZV358 Fig 14 is figure 8 on the LMV358-N or Fig 15 on the LMV358 datasheets.
For the AZV358, at 25mA, the output is just under 2V from the rail...so you only have 0.7V of swing left.
The LMV358-N most likely…
to User473,
I searched all the op amp portfolio with the parametric search (precision, general purpose, and high-speed). There are 6 options with temperatures of 150C and above (see attached). The best match is the OPA211-HT (210C max). This is the…
