Part Number: LMX2492EVM Tool/software: Hi TI forum,
I'm new with this devices and I'm currently trying to configure the 'tutorials' inside User's Guide. When setting up FSK mode same way as UG and using a waveform generator with square waveform and…
Part Number: LMX2492EVM Tool/software: Hi TI forum,
I have just connected an external VCO by removing R6 and R3_LF, and connecting RF_out's SMA to VCO RF_out divided by 16 (24 GHz VCO to 1.5 GHz DIV) and TP_Vtune to VCO's Vtune port with a 1nF capacitor…
Part Number: LMX2492EVM Tool/software: Hi TI forum,
I have just connected an external VCO by removing R6 and R4_LF, and connecting RF_out's SMA to VCO RF_out divided by 16 (24 GHz VCO to 1.5 GHz DIV) and Valf to VCO's Vtune. Also I have changed the…
Part Number: LMX2492EVM Other Parts Discussed in Thread: LMX2492 Tool/software: Hello,
We have recently purchased the LMX2492EVM and would like to clarify a few details regarding VCO replacement.
Our goal is to replace the onboard VCO on two separate…
Part Number: LMX2492EVM Tool/software: Hi TI team,
I am currently working on a project involving the LMX2492EVM and have encountered some issues. I am developing my own C++ GUI to interface with the device and control its operation according to my requirements…
Part Number: LMX2492EVM Other Parts Discussed in Thread: USB2ANY , Tool/software: All,
I am wanting to integrate the EMV, USB2ANY and an SBC into a single enclosure for field work. Would it be possible to get a PDF and a STEP, DXF or EPS file of these…
Part Number: LMX2492EVM Other Parts Discussed in Thread: USB2ANY Tool/software: Dear Noel,
A time ago I purchase two additional LMX2492EVM modules.
Now I want to use them, but I am unable to upgrade the new USB2ANY interfaces.
The Tics Pro Version…
Part Number: LMX2492EVM Other Parts Discussed in Thread: LMX2571 , LMX2572LP Hi,
I want to use the LMX2492EVM as the clock for my high speed DAC. The datasheet mentions the PLL range to be 500 MHz - 14 GHz. I want to get a clock of 1 GHz for the DAC…
Part Number: LMX2594EVM Other Parts Discussed in Thread: LMX2492EVM , , LMX2594 , PLLATINUMSIM-SW , LMX2492 Tool/software: Hi Texas team,
I am using LMX2492EVM and LMX2594EVM board for our application where we need Ramp signal which bandwidth will be…
Part Number: LMX2492EVM Dear TI Team,
I'm currently making use of the LMX2492EVM for ramp generation within a low power FMCW radar system, but would like to make some changes to the VCO circuitry.
Is it possible to share the Altium project files?…
