Part Number: LMX2595 Other Parts Discussed in Thread: LMX2594PSEVM , Tool/software: hello
Recently, I have been testing the phase synchronization and adjustment functions of LMX2595 and have some questions that I hope can be answered: When I only select…
Hi Steven,
In Cat.1b sync, VCO_PHASE_SYNC needs to be =1, but no sync pulse is required.
Below user's guide has step-by-step phase sync example. This document applies to LMX2694.
www.ti.com/.../LMX2594PSEVM
Hi There,
I don't have problem making the LMX devices to lock with your configuration file. Please note our programming recommendation is, first of all, program all the registers in descending order. Wait for 10ms then program R0 one more time.
After…
HI Atul,
I checked this out, I didn't see phase misalignment. Once both devices are powered up and programmed, their outputs are phase aligned. I also tried reset one of those devices and then reprogramed it, output phases are again aligned. I was using…
Hi Zaheer,
Here is the data of my EVM at RFoutAP, you should get similar output power from the EVM. The data in datasheet was taken with a test board having very short trace length, this board is similar to this one: https://www.ti.com/tool/LMX2594PSEVM…
