Part Number: CDCLVP111-SP Other Parts Discussed in Thread: LMX2694-SEP LMX2694 datasheet calls for AC termination on the input, with the caps on the receiver side of the termination resistors. The recommended termination resistors on the driver side are…
Part Number: LMX2694-SEP It looks like there are some errors in the VCO Noise Metrics and Characteristics for the LMX2694 in PLLatinum Sim 1.6.3.0/2023_4_19 - Specifically with VCO3.
For VCO3, the 1/f^3 and 1/f^2 noise is entered incorrectly - Critically…
Part Number: LMX2694-SEP
We will be using pull-up resistors on the output lines, and I want to be certain we don't over power the resistors. What is the output buffer current draw versus output power setting? I did not find this information in the datasheet…
Part Number: LMX2694-SEP Hi,
Is there any method for higher power than the characteristics in the datasheet?
In the datasheet, Pout is 2dBm at fout=8GHz.
can it be increased up to 6dBm with any work around?
Thanks.
Part Number: LMX2694-SEP We will not be using RFOUTB and will configure R44 to power down this output. Figure 8-7 (Termination of Unused Output - Differential) in the datasheet shows to use 11 parts to terminate an unused output... 11 parts! Is this correct…
Part Number: LMX2694-SEP Other Parts Discussed in Thread: LMX2594 Dear Team,
Please kindly look into the below question, thank you for your guidance.
We are optimizing the feedback power control algorithm of our LMX2694 synthesizers.
At the moment…
Part Number: LMX2694-SEP Other Parts Discussed in Thread: LMX2694EPEVM Hello Expert,
Our customer is under review ref. schematic of LMX2694EPEVM.
They want to minimize the RLC components as much as possible.
Could you please mark the essential used…
Part Number: LMX2694-SEP Hi all,
LMX2694 supply current is defined as 360mA (typical) in the datasheet.
Could you please share absolute maximum value of current value if available?
Regards,
mehmet
Part Number: LMX2694-SEP Tool/software: Good afternoon,
I'm looking at using the SYNC mode feature on the LMX2694-SEP and am wondering how the SYNC Pin Timing Characteristics for Category 3 SYNC given in Table 7-13 were selected? Of the three given…
Part Number: LMK04832-SEP Other Parts Discussed in Thread: TIDA-010274 , TIDA-010260 , , LMX2694-SEP Tool/software: In the TIDA010260 it does not use an LDO to power the LMKx, however TIDA-010274 does. It does not specify on the datasheet but given some…