Part Number: LP-AM263
Hi Team,
We have been able to boot(1s-1s-4s) with custom flash(MT25QL512ABB), but can't access flash above 8MB.
We tried to read/write QSPI flash in configuration mode, but we couldn't find the API in SDK 09.01.
If possible…
Shaunak,
Shaunak Deshpande said: Apologies for a late response, The enet team is still evaluating a good way to accomplish this. Meanwhile I can think of one way,
Is there any update from your Enet team on this?
Part Number: LP-AM263 Other Parts Discussed in Thread: LP-AM243 Hello,
I am testing the Enet Layer 2 CPSW Example provided with version 9.01.00.41 of the AM263x MCU+ SDK. I am increasing the transmitted packet size (from the host PC) to attempt to benchmark…
Part Number: AM2634 Other Parts Discussed in Thread: BP-AM2BLDCSERVO , LP-AM263 , SYSCONFIG , LP-AM243 Good day,
On the board BP-AM2BLDCSERVO SPI interface is connected as follows (using BoosterPack connector's numbers):
SPI_CLK: J5-47
SPI_CS0: J6-58 …
Part Number: LP-AM263 Other Parts Discussed in Thread: SYSCONFIG , UNIFLASH Hi,
I am currently exploring the LP-AM263 board from Texas Instruments, and I have some questions that I hope you can provide clarification on.
Board Capabilities: According…
Part Number: LP-AM263 Other Parts Discussed in Thread: AM2634 , AM2631 , AM2632 Hi,
We are currently in the process of selecting a Micron controller for our safety application, specifically focusing on the AM263x series, utilizing the LP-AM263 evaluation…
Part Number: LP-AM263 Hello. I am trying to use the onboard XDS110 to toggle the reset and SOP0 line. We only every run on QSPI and UART mode so SOP0 is the only switch that we need to toggle. My plan was to jump the GND_XDS and GND to have a common re…
Part Number: LP-AM263 Hi,
I'm working on an application wherein I have to transmit some data over UART and get the transmission complete interrupt once it is over. The UART is configured to transmit/receive over DMA.
I've gone through the TRM and…
Part Number: LP-AM263 Other Parts Discussed in Thread: SYSCONFIG , Hi,
We are migrating our application from AM263x CC board to AM263x Launchpad.
In CC board we are configuring pins C7 and B7 as I2C SCL and SDA to use IO Expander. We are using this expander…