Part Number: MPY634 Hi team,
My customer is looking for a multipier. They want to do ouput=A²+B² equation. A and B are analog input signals. They don't need negative power supply rail and prefer to use positive only power supply.
Do you have better…
Part Number: MPY634 Hello,
Can you please clarify what the sentence "Max input voltage = ±1.25 SF" at the beginning of the theory of operation paragraph means ?
It seems misleading because from our understanding of the electrical characteristics the…
Part Number: MPY634 Tool/software: Hi Team,
Please find the attached block diagram for my mixer circuit.
The mixer IC is used to mix 134kHz LO signal with an RF incoming RF signal to produce 4.2kHz IF frequency signal, which is then amplified and…
Part Number: MPY634 Tool/software: Hi team,
Is it recommended using MPY634 with Vs=±16V?
Could you tell me which specs are effected by that? And how is it effected?
Regards, Hiromu
Part Number: MPY634 Could someone please provide me with the MPY634 library file? I can't seem to locate it. I'm grateful.
mail id--> eey227533@iitd.ac.in
Part Number: MPY634 Tool/software: Hi team,
Customer wants a MULTIPLIER, one input is 12V and another is 1V. Could you please recommend the best fit?
Nison
Part Number: MPY634 Hello
i'm using the MPY634 mixer chip for making Lock in amplifier.
To configure MPY634's SF(Scale Factor) to 1, I configured the circuit as below.(MPY634 datasheet figure 1.)
However, looking at the resulting values, it doesn…
Part Number: MPY634 Hello
I am using MPY634 IC chip for mixer purpose. And we want to supply +15V and -15V as power.
I have 3 questions
1) How much current limit should I put on the power supply? 2) And how much current is supplied to the power…
Part Number: MPY634 Hello
I'm using MPY634 mixer chip
As shown in the picture below, the power pins(15V/-15V) are connected to the power supply and only the ground is connected to the x2 y2 pins, but an internal short has occurred between the input…
