Part Number: MSP430FR5858 I have a technical question about clock register settings of MSP430FR5858.
Recently, we recognize we set wrong value for HFFREQ in CSCTL4 register of MSP430FR5858.
We are using 16MHz as HFXT. But the HFFREQ settings was 0…
Part Number: MSP430FR5858 Tool/software: Code Composer Studio Hi,
I am using the MSP430FR5858 microcontroller for my application, where I want to use low power mode. I have done my initial development using MSP430FR5969. My issue is, in 5969, LFXT is…
Hey Issac,
There is a software example for the MSP430FR5858 where it uses the ADC to read the internal temperature sensor and then convert it to degrees. I would take a look at this example, run it as it first to have it working, and then modify from…
Part Number: MSP430FR5858 Hi,
My customer wants to know the state of the pin during reset(i.e. the nRST/NMI pin is held low).
It seems that that the pins will be in their default state (inputs).
1.Is my understanding correct?
I found the following…
Part Number: MSP430FR5858 Hi,
I am measuring a sensor output which is between.2 - 1.5 volts and I am planning to using the internal voltage as reference for the ADC will it have any effect on the life of the controller or does it adversely affect the…
Part Number: MSP430FR5858 Are there any test reports, in particular, regarding exposure to gamma radiation? Customer would like to evaluate the suitability of FRAM products for a new disposable medical device that gets gamma sterilized.
Regards, …
Part Number: MSP430FR5858 Hi Experts,
We would like to get the best ADC performance on embedded 12bit ADC. The one option is to use external REF(VeREF+) and set to 3.3V or the same voltage with AVCC instead of using internal 2.5V reference. Do you have…
Part Number: MSP430FR5969 Other Parts Discussed in Thread: MSP430FR5858 Hi Team FRAM,
My customer needs a gamma-tolerant solution (autoclaving) & has the following questions..
We know the FRAM is safe and sound – what about the other pieces of the…
Hi Prudhvi,
the MSP430FR2000 is a fine choice for this application. Do you have an I-avg current consumption target for this component, or are you just looking for best possible performance in that regard? I ask because, like most things, there are…
Hi MSP student,
I'm attaching a list of devices supported by SYS/BIOS (the RTOS):
3276.devices.html
If you want TI-RTOS, which includes SYS/BIOS as well as driver support (SPI, UART, etc), the list of MSP devices supported by TI-RTOS is the following…
