Part Number: MSP430FR5988 We need to analyze the spectrum and phase of 1kHz periodic signal. We need to use ADC to sample the 1kHz signal, and then perform FFT operation. Is there a suitable MCU recommended? The price shall be less than 2USD.
Hi Eduardo,
You are correct, the minimum pin count for devices the with ESI module is 64.
The following devices are also 64 pin devices with ESI module and no LCD module
MSP430FR5887
MSP430FR5888
MSP430FR5889
MSP430FR58891…
There are signs that the following members are coming. Any hint when?
MSP430FR4131, MSP430FR4132, MSP430FR4133 MSP430FR5887, MSP430FR58871, MSP430FR5888, MSP430FR58881, MSP430FR5889, MSP430FR58891 MSP430FR5986, MSP430FR5987, MSP430FR59871, MSP430FR5988…
Hi, JKim,
Please check IAR website ( http://supp.iar.com/Updates/?product=EW430 ) to learn which version supports MSP430FR4133. Please use the service pack 6.10.7 or 6.10.5.
4. IAR Embedded Workbench for MSP430 - Service Pack 6.10.5…
Hi MSP student,
I'm attaching a list of devices supported by SYS/BIOS (the RTOS):
3276.devices.html
If you want TI-RTOS, which includes SYS/BIOS as well as driver support (SPI, UART, etc), the list of MSP devices supported by TI-RTOS is the following…
As one more update, you can find the full revision table of compatible hardware and software revisions included in the release notes:
Release-Notes-MSP-GANG.htm
See the section called "Version Matrix"
I ran into some issues using pdkProjectCreate script. See attached text files for output of both scripts i.e. pdkProjectCreate and pdksetupenv. The pdkProjectCreate script created a folder called MyExampleProjects but it was empty. The script appears…
Hi SeaFesse, If you check the release notes from version 1.2.8.0, in the Version Matrix section, you'll see that the MSP-GANG HW v1.04 is only compatible with version 1.2.1.0 and higher. So this combination should not be used - please use the latest software…
Hi Paul,
I use the MSP430 product selection page from https://www.ti.com/microcontrollers-mcus-processors/msp430-microcontrollers/products.html and save all parts in the spreadsheet. I use the filters to filter out parts. There are quite a few that…
So I just found something interesting! I have a PC with a clean install of win10, and I installed CCS 11.2 with the command line "--mode unattended --disable-components PF_MSP430,PF_MSP432"
And then installed the arm compiler and tried to use the…
