Search tips
Showing 70 results View by: Thread Post Sort by

  • MSPM0G1506: How to set the PWM of TIMA0 both low?

    TI Thinks Resolved
    Part Number: MSPM0G1506 Hello, How to set the complementary PWM both low without DisableIRQ of PWM? When set Duty to be 319(250kHz), the lower FET is always turned-on, how to close both up and low FET? Thanks!
    • Answered

  • MSPM0G1506: Error -616 while trying to connect/debug via external XDS110 Debug Probe

    Resolved
    Part Number: MSPM0G1506 Other Parts Discussed in Thread: UNIFLASH , CC3220S , CC3220S-LAUNCHXL , CC1352P While trying to load the sample application via Code Composer Studio(version 12.7.0) to MSPM0G1506 could be seen the error -616 and advice to lower…
    • Resolved

  • MSPM0G1506: When writing data to the internal Flash ROM, if the data is set as a global variable, a HardFault interrupt occurs.

    Part Number: MSPM0G1506 Other Parts Discussed in Thread: MSPM0G3507 Tool/software: Hello. My name is Mori. I am checking the writing of the internal Flash ROM, and a HardFault interrupt is occurring at "DL_FlashCTL_programMemoryFromRAM64WithECCGenerated…
    • Answered

  • MSPM0G1506: About how to obtain the output voltage of OPA0_OUT

    Resolved
    Part Number: MSPM0G1506 Other Parts Discussed in Thread: SYSCONFIG Hello. We are using "mspm0g1506". As shown in the diagram, we would like to set "OPA0" and obtain the output voltage of "OPA0_OUT" as the AD value. In the diagram, it seems to be connected…
    • Resolved

  • MSPM0G1506: About ADC Linearity Parameters when using HW averaging (14-bit effective resolution)

    Part Number: MSPM0G1506 H. I would like to know about the following Linearity Parameters of ADC when using HW averaging (14-bit effective resolution) in MSPM0G1506. Could you please let me know? The data sheet did not list the parameters when using…

  • MSPM0G1506: DAC SPEC of MSPM0G150x

    TI Thinks Resolved
    Part Number: MSPM0G1506 Hi, I have a question about the DAC of MSPM0G150x. There is a demand for high processing speed with DAC output on the application. The cpu timer can generate an interrupt every 10 us. Can the MSPM0G series DAC achieve the above…
    • Answered

  • MSPM0G1506: CMSIS Pack register definition file (SVD) misses some registers

    Resolved
    Part Number: MSPM0G1506 Other Parts Discussed in Thread: SEGGER Hi, when looking into the register definitions of the latest CMSIS pack (download version 1.1.0 here: https://www.keil.arm.com/packs/mspm0g_dfp-texasinstruments/versions/ ), it seems like…
    • Resolved
    • Answered

  • MSPM0G1506: Would like to know the load current of OPA

    Resolved
    Part Number: MSPM0G1506 Hi team, When we look at the latest datasheet of MSPM0G150x, the load current of OPA on the latest datasheet is much higher than the load current of OPA on the previous datasheet.(descripted in 7.18.1 on the datasheet.) Is…
    • Resolved

  • MSPM0G1506: does MSPM0G150x UART support the DMA+IDLE interrupt to receive random length(1~128Bytes) datas?

    TI Thinks Resolved
    Part Number: MSPM0G1506 Different lengths data (1~128Bytes) frequently appearing on the uart rx line, baud rate 1Mbps。We need to receive this data in a timely and accurate manner，but don't want to consume too much time of the core. we use dma+rx idle…

  • Arm-based microcontrollers forum

    TI Thinks Resolved
    Part Number: MSPM0G1506 Tool/software: Hi Team, My customer use M0G1506 as SPI slave, but he don't fill TX FIFO at first transfer. But M0G1507 receive wrong data(check by CRC) , why this happened? In theory, slave can receive right data. …

Didn't find what you are looking for? Post a new question.