Part Number: MSPM0G3506
Tool/software:
Hi,
1. Can you help to advise what circumstances will the comparator COMP0 of MSPM0G3506 be set to amplifier mode, and its output will change year-on-year based on the input (analog output),
rather than…
Part Number: MSPM0G3506-Q1 Hi,
We use the MSPM0G3506-Q1 in our project, and now, We found during on-site testing that when the internal comparator of the CPU is set to data reception (as shown in the attached figure), the negative input and output pins…
Part Number: MSPM0G3506 Tool/software: Hi,
We use the MSPM0G3506 in our new project and now we have below issue:
1. We run the program in the RAM when the power on, the power consumption is reduction or not?
2. The MCU has the unique ID or not,…
Hi Peter,
We has below issue for the MSPM0G3506:
1. Can you provide me with a setting for an external I/O port that generates interrupts on the rising/falling edge and can wake up the SLEEP CPU.
At present, interrupts can be generated, but when…
Part Number: MSPM0G3506-Q1 Tool/software: Hi!
The operating temperature range is -40-125 ℃ and the storage temperature is -40-150 ℃ of MCU MSPM0G3506-Q1 , why is Tj only -40-130 ℃?
Thanks!
Part Number: MSPM0G3506 Other Parts Discussed in Thread: TMDSEMU110-U , Tool/software: Hello TI team,
1) We are using MSPM0G3506 microcontroller in our new product line (about 10 devices). At present, we are designing the layout of the PCBs. I need…
Part Number: MSPM0G3506 Tool/software: Hello,
We are using MSPM0G3506SPTR MCU in one of the application and we want to avoid using external low frequency crystal, only high frequency crystal will be used. Application operation temperature range is…
Part Number: MSPM0G3506-Q1 Tool/software: Hi,
We use the MSPM0G3506-Q1 in out new project, and we have below issue for our design:
1. We have tested that there is 1.67ma in the 125 degree sleep state. What should we pay attention to in terms of power…
Part Number: MSPM0G3506 In MPM3506(64 pin) MCU we need 6 PWM output to drive load . We have configured 6 pin of Timer . But while using timer pin it automatically selecting GPIO pin. Can you suggest how to select pin for PWM output
Part Number: MSPM0G3506 Other Parts Discussed in Thread: SYSCONFIG , Tool/software: I have received a Sysconfig file from a software colleague, for whose pinout I should create a schematic and a board. I have installed the latest version of the standalone…
