Part Number: MUX507 Other Parts Discussed in Thread: MUX508 , TMUX7308F Hi Team,
my customer design MUX507 for analog input channel multiplexer, however their end customer connect +22V to CH15 and find CH8 signal has 3V DC offset.
Please refer to below…
Part Number: MUX507 Other Parts Discussed in Thread: TMUX8108 , TMUX7308F , MPC506 Hello,
I have a question for MUX507.
The datasheet specifies absolute max input voltage to Analog pins as Vss-2 ~ VDD+2.
And there is a note, “Voltage limits are valid…
Part Number: MUX507 Other Parts Discussed in Thread: SN65C1168E , , CD4097B , TMUX1308 , SN74HC151 , CD74HC238 Hi all,
My customer want to design an 8 RS485 mux with MX507 + SN65C1168E. Is it ok for using MUX507? or other suggestion for the application?
…
Part Number: INA148
Dear Luis, thank you
Please, see my previous thread and your answer.
Point is that, I do not need high measurement accuracy. Error 10-15% will suit me.
In fact, the signals, transmitted on this line, are pulsed signals with a duration…
Part Number: INA148 Other Parts Discussed in Thread: MUX507 , PGA281 , MUX508 Dear Marek, please answer
I need to receive signals from two wire line, please, see attach.
I think it would be right to put INA148 at the input of the line (at the input of the…
Part Number: MUX507 What would be the EN input high voltage for VDD (pin 1) = +24Vdc and VSS (pin 27) = 0V? Would 5V at EN input be considered as a high or low? Thanks.
Part Number: MUX507 Other Parts Discussed in Thread: MUX36D08 , Hello Team, What is the difference between MUX507 and MUX36D08? They have almost identical parametrs and datasheets. But on ti.com thier prices differs twice. Why? BR, Ilya.
Part Number: MUX507 Dear, Support Team. I would like to know about the common mode voltage range of the differential input type. Can common mode voltage be used within the power supply voltage range? For example, can we take 2V difference input of common…
Other Parts Discussed in Thread: TMUX7208 , TMUX6208 , MUX506 , MUX507 Hi Tier,
I am looking for a dual channels 16:1 mux that is similar to DG407DYZ, if possible, we would like to have higher spike voltage than DG407DYZ.
Does TI have a MUX solution as described…
Part Number: MPC507 Other Parts Discussed in Thread: MUX507 , OPA177 Hi Team
I understand that MPC507A is “standard ESD tests” but can’t find ESD Ratings in the datasheet.
Could you please let us know ESD Ratings?
And, I confirmed MUX507…
