Part Number: MUX509 Hello guys,
One of my customers is considering using MUX509 for their new products.
They need On-resistance drift data. They know the device datasheet has the data at VS=10V condition.
Do you have the drift data in other conditions…
Hijack,
The MUX509 device is a passive FET switch which means it doesn't have any drive, repeat, or signal conditioning capability. It will simply pass the voltage it sees on one side of the FET to the other.
Determining input or output of the MUX509…
Part Number: MUX509 Other Parts Discussed in Thread: TMUX1072 , TMUX136 Hi team，
Customer's MCU just have one I2C. They want to use two I2C. Do we have Mux device for I2C expend?
Thanks!
Part Number: MUX509 Hi,
Please tell me how to handle unused pins with mux 509.
S1B, S2B, S3B, S4B, DB are not used. In this case, each terminal is OPEN, or does Pull-up / down connection?
best regards
cafain
Dakotah,
Thanks for the quick response. I figured it would be tough to find a single MUX that would be applicable. While I would like to keep the USB lines and RS232 lines together for simplicity, its looking like I might have to change to two different…
Part Number: ADS124S08 Other Parts Discussed in Thread: MUX509 Hi Bob,
Thank you for the information! It helped us in designing the schematic.
In our project we are looking to provide RTD and thermocouple sensor interface support on different 10 Connectors…
Part Number: MUX508 Other Parts Discussed in Thread: MUX509 , Hello TI support,
We are working on one industrial product where we have +/-5V in our board. MUX509 is required multiplex channels having signal upto 3mV & 7KHz frequency. We have such 5…
Hi Guni,
We don’t have the TMUX6119 model available right now but do have plan to work on it soon.
Can you use the MUX509 model for now? The performance is pretty similar to TMUX6119,
http://www.ti.com/product/MUX509/toolssoftware ..
Thanks…
Part Number: OPA357 Other Parts Discussed in Thread: MUX509 , OPA837 , OPA2837 Hi,
We need to sense 2 AC inputs (2Vpp, 2MHz). We have 2 options -
1. Use 2 separate OPA357s and tie their 2 outputs together and pass to next stage. We will use shutdown…
