Part Number: OMAP-L137 Hello,
We needed the TI OMAP-137 arm gel files referenced in this TI forum post. https://e2e.ti.com/support/processors-group/processors/f/processors-forum/420417/omap-l137-gel-files
The TI wiki links used in this post are no…
Part Number: OMAP-L137 Hello,
We understood that TI was no longer supporting TI RTOS for this platform, so we were investigating the effort to port freeRTOS or if TI had a TI port example for the DSP on the OMAP137. Do you have any additional application…
Part Number: OMAP-L137 Other Parts Discussed in Thread: SYSBIOS , OMAPL138 Hello,
Do you have a freeRTOS reference port with drivers + BSP for OMAP-L137 reference board DSP core? The TI-RTOS is obsoleted now. Or do you have the driver/BSP code for your…
Part Number: OMAP-L137 Other Parts Discussed in Thread: OMAPL138 Hello,
Our team had been designing with the OMAP-137 hardware for a medical device. When we contacted TI for technical support we discovered that TI had obsoleted the main software TI…
Part Number: OMAP-L137
Hello,
We are using your OMAP-137, right now with the TI-RTOS running on the DSP core (a different ticket on related questions). Right now we are only using the DSP, but are looking to perhaps use the other core as well. We…
Part Number: OMAP-L137
Hello,
We have a project with the OMAP-137 DSP (C67x) that is currently running with your TI-RTOS (BIOS DSP) and investigating porting to another rtos since TI no longer supports the TI-RTOS solution on the DSP. There are also…
Hello Theron,
Unfortunately, at this point in time we can no longer offer hardware or software design support for OMAP-L137.
For future readers, we will continue producing this part in our factories for as long as your existing designs need it, as…
Part Number: OMAP-L137 Tool/software: Hello everyone, In my current design I used OMAP-L137 BGA package and the PCB design has a major error with L11 and L12 pin are connected to GND. My question are:
Can I remove the part and isolate the these pins…
Part Number: OMAP-L137
I have an older OMAP-L147 processor. I am trying to program the PRUs using CCS Studio 12.5.
When I create a new project, I select "OMAP-L1x" --> "OMAP-L137" as the target. After I do this, I see the "Arm9" and "C67XX" tabs for…
Part Number: OMAPL137-HT Hello,
How can the contents of registers DIEIDR0-3 of the SYSCFG module in the OMAPL137 chip be used by our firmware to identify a unique chip ID to differentiate one chip from another?
If DIEIDR0-3 is not capable of this…
