Other Parts Discussed in Thread: OPA2107 Hi,
I need to know the ESD rating for the pins on the OPA2107. I could not find this information in the data sheet. Some op-amps have ESD information, for instance, 500 V charge-device-model (CDM). I searched the…
Other Parts Discussed in Thread: TL072 , OPA2107 , LM741 , OPA1642 Hi,
The data sheet does not have plots of output voltage swing versus output load, nor output voltage swing versus supply voltage. The output voltage swing is specified in the data sheet…
Other Parts Discussed in Thread: OPA2107 , OPA2132 , TINA-TI Hello,
I have an audio circuit that use a standard dual input operational amplifier. I tried different opamps and when I inserted opa2132, the DC voltage at the output is around 5mw. However…
Part Number: OPA2111 Hi, I am sad that the OPA2111 will be discontinued ; ( 26 years of loyal service, RIP. Is there any plan to make an SMD version of OPA2111 with the exact same specification ? I am currently only aware of the OPA2107 which has similar…
Part Number: LOG114EVM Other Parts Discussed in Thread: OPA2107 , LOG114 , LMP7721 , LMC6001 , OPA627 , OPA365 Dear experts;
In the frame of developing a low-light sensing experimental board, I recently acquired a LOG114EVM development board. With included…
Other Parts Discussed in Thread: OPA2107 In the OPA2107 the datasheet shows the bias current increasing with temperature. When I measure the bias current, I don't see this even up to 125c. It remains fairly flat. I understand that with protection diodes…
Thank you Kevin for your time, I am just using it to create waveforms using arduino, it requires a buffer in voltage mode right? So why not use it in current mode if you are going to use an opamp anyway. I have a couple of OPA2107 and TLC072 lying around…
Other Parts Discussed in Thread: OPA4131 , ACF2101 , OPA2107 Hello,
I had a few questions about the spectrum I'm measuring at the output of my buffer circuit with the switched integrator, an ACF2101. The buffer amplifier is the OPA4131.
http://www.ti…
