Part Number: OPA211-HT Other Parts Discussed in Thread: OPA211 Hi,
In the attached file, why the IB and Vos of the 2nd op amp of OPA211 is not considered in the calculations ? Thanks Doc50.docx
Part Number: OPA211-HT Other Parts Discussed in Thread: OPA2333-HT Hi,
During testing Vos and IB for my newly purchased op amps (OPA211-HT & OPA2333-hT), I observed that my measurments were way above the datasheet parameter values. I discussed that…
Hi,
The characteristics specified in the datasheet for 210C are fine for our application. The only issue we have is since our unit is supposed to be operating STRICTLY at hot temp (210C), naturally we are interested to see the reliability of the parameters…
Part Number: OPA211-HT Other Parts Discussed in Thread: OPA211 , OPA2333 Hi,
I am purchsing QTY=2 unit of OPA211SHKJ and QTY=2 of OPA2333SHKJ to perform a verification test on these units (OMG, they are expensive!) . I was trying topurchase an EVM proto…
Part Number: OPA211-HT Other Parts Discussed in Thread: OPA2333-HT We have purchased OPA211-HT & OPA2333-HT to evaluate and characterize for our new R&D project. During test, I found that Vos and IB were not per datasheet. I brought up the issue in E2E…
Part Number: OPA211-HT Other Parts Discussed in Thread: TINA-TI , Tool/software: Hello,
I need a .lib file of this component for a TINA-Ti simulation.
It could be another operational amplifier that can works at 200ºC.
Thanks in advanced.
Asie…
Part Number: OPA211-HT Other Parts Discussed in Thread: OPA2333-HT , CD14538B Tool/software: Hello,
I'm needing a cross for the below amplifier. Would you guys have anything that is a direct replacment for the below? It would have to be High temperature…
Part Number: OPA211-HT Tool/software: We intend to use this op amp (OPA211-HT) in our pressure transducer, which needs to operate at around 250 C temperature. The parameters such as: open loop gain, Vos, Ib are reasonable (compared to other high temp…
Part Number: OPA211-HT Tool/software: Hi,
This is related to my previous thread on OPA211-HT
I have the following questions:
1. Since Ios at 210 C is 150 nA(max) and I am using this op amp at 210C, with gain of about 700, should I be concerned…
Part Number: OPA211-HT Hello,
I am using " OPA211-HT" (since it is available in KGD form). With unity gain for input voltage from 0 to 3.3V, I get linear output. But when I set gain to 4.16, I see non liner behavior for input voltage below 1.25V. If…
