Part Number: OPA2170 Other Parts Discussed in Thread: OPA2991 In the d/s, there are two plots say the overshoot at certain cap load.
In stability's point of view with system, the phase margin with OPA should be > 45degree. There are two questions here…
Hey Brian,
Was this issue resolved? I'll mark Michael's response as "TI Thinks Resolved," please let us know if the issue is not resolved and how we may assist further.
All the best, Carolina
Part Number: OPA2170 Hello,
Due the OPA2170 from customer's circuit is damaged by ESD, causing pin6 short to GND. Customer want to reproduce this failure.
Is there any actual experimental methods to test their circuit? e.g. function generator apply…
Part Number: OPA2170 Other Parts Discussed in Thread: OPA2196
Dear Technical Support Team,
Large input signal causes strange noise on power supply and output.
For example input is from GND to 28V, then power supply voltage fluctuates by about 1Vpp and…
Part Number: OPA2170 Other Parts Discussed in Thread: OPA2834 , TLV9062 , TLV9052 , TLV9002 Hello,
I am working to cross the ADA4692-2, and I think the best cross would be the OPA2170 or the OPA2834. Could you please confirm this?
Additionally, what is our…
Part Number: OPA2170 Other Parts Discussed in Thread: TLV9062 , OPA2990 Hi there,
My customer is using OPA2170 in an inverting structure as below. The power supply is GND and -2.8V(not -2.5V in the picture). The circuit works, but there is 10mV pk-pk noise…
Part Number: OPA2170 Other Parts Discussed in Thread: OPA2188 , OPA2333 Hi Sir
May we have suit part can direct replace MAX44248AUA?
Since cross reference i can't find the correct part.
but OPA2171AIDGK/OPA2170AIDGKR/OPA2197IDGKR/OPA2192IDGKR seems …
Part Number: OPA2170 Other Parts Discussed in Thread: LM7705 , OPA2990 Hi Team,
My Japanese customer has a question about OPA2170AIDCU. The question is below:
This op amp is used as a voltage follower for the buffer before and after the voltage dividing…
Part Number: TLV2170 The TLV2170 whithstands at output only short-circuit to ground. We need also short-circuit to plus. Could we put some Rout resistor to output similar as at capacitive loud? How big must be the resistor? Would you recomend me some…
