Farhan,
GBP of 1MHz is nowhere sufficient to obtain 80kHz usable bandwidth in a close loop gain of 100 but GBP of 80MHz is probably an overkill. OPA360 has a fixed internal gain of 2 so you may not use it for your desired gain of 100. Most of our amplifiers…
Thomas;
You seem determined to measure the background illumination current, so here is a better way of doing that. It is necessary to provide a negative photodiode bias and there is some additional noise, but this circuit is simple and could employ…
Andrew, you probably should not be switching to a non-RR out device like the THS4211, here are your choices in RRout, higher slew rate VFA devices from TI or NSM, Be careful with those SSBW for the CMOS parts - those are false high numbers not even remotely…
Other Parts Discussed in Thread: LMH6554 , LMH6629 , OPA653 , OPA656 , OPA657 , THS4601 , LMH6601 , OPA2354 , OPA2355 , OPA2356 , OPA2357 , OPA3355 , OPA354 , OPA355 , DEM-OPA-SO-1A , DEM-OPA-SOT-1A Hi,
I have a voltage signal in the range of 10 µV…
Part Number: TLV8812 Hi Team,
I'm using TLV8812. Please kindly help to review the schematic as blow, any comment will be appreciated. Thanks very much.
tgs5042_application note(en)_rev03.pdf
TGS5042.pdf
to User473,
I searched all the op amp portfolio with the parametric search (precision, general purpose, and high-speed). There are 6 options with temperatures of 150C and above (see attached). The best match is the OPA211-HT (210C max). This is the…
