Part Number: OPA2376
Could you please let me know the behavior of your product in following cases?
Case1: The IN+ and IN- pins are entered the signal with Voltage from 0.5V to 5.0V, without power supply. (V+ = V- = GND)) If the device will be…
Part Number: OPA2376-Q1 Other Parts Discussed in Thread: TLV2197-Q1 , LMV842-Q1 Hi There,
As the part:OPA2376QDGKRQ1 VSSOP is out of stock, any suggestion for footprint compatible alternative part to replace?
Thanks and Best Regards
Part Number: OPA2376 Other Parts Discussed in Thread: OPA376 Hi Support team
my customer used OPA2376 for current amplification, since the output current is huge, the gain needs to be increased to 1000
Shunt R è 0.5m ohm
R577 & R579 è 266- ohm…
Part Number: OPA2376 It wasn't clear to me what the dimensions of OPA2376 YZD footprint and package are:
Datasheet page 1 has body size of 2.3 x 1.3 mm
Mechanical drawing page 36 has body size of 2.178 x 1.14mm
BXL file generates an outline and 3D…
Part Number: OPA2376 Other Parts Discussed in Thread: OPA376 , Hello,
When there is two different input, is there any concern due to channel separation (0.5mV/V)? Or any recommendation on how to limit concerns?
When the IC is off, does input pins (IN_A…
Part Number: OPA2376 Other Parts Discussed in Thread: OPA837 Dears
we have used the OPA2376 in a high DC accuracy system, and we have found the DC offset over max spec limitation mentioned in datasheet, like 30uV , so need your help if this is normal…
Part Number: OPA2376 Other Parts Discussed in Thread: TINA-TI , OPA376 When using TINA SPICE to model the OPAx376, the input bias current appears normal only when the common mode voltage is exactly half of the supply voltage. Otherwise the input bias current…
Part Number: OPA2376 Hi,
I am using OPA2376 as follower in my circuit.
I found the open-loop output impedance is 150 Ω in the datasheet.
And the output impedance is very low when the socket work as follower. But could your share the specific parameters…