Search tips
Showing 11 results View by: Thread Post Sort by

  • OPA2834: Humidity Specification

    TI Thinks Resolved
    Part Number: OPA2834 Other Parts Discussed in Thread: OPA2356 , OPA2310 , TINA-TI , OPA356 Hi teams, My customer has the following questions regarding OPA2834. Could you please give me an answer? <Question 1> Are there any specifications regarding humidity…

  • OPA2834: Regarding OPA2834 application

    Part Number: OPA2834 Other Parts Discussed in Thread: OPA2387 Dear TI team, Good evening. We have requirement in which,we need to sense and measure -30V and +30V. So we are using OP2834 for this application. Kindly find the attached circuit.Where we…

  • OPA2834: Transient simulation

    TI Thinks Resolved
    Part Number: OPA2834 Other Parts Discussed in Thread: PSPICE-FOR-TI , TINA-TI Hi all* i'm trying to do a transient simulation but have convergence error. Also i tried first to run the BIAS POINT simulation but it also ends with convergence problem…

  • [FAQ] [H] Frequently Asked Questions - High Speed Amplifiers Selection Guide - Bipolar Input Amplifiers

    Frequently Asked Questions: Amplifiers >> High Speed Amplifiers >> HSA Selection Guide >> Bipolar Input Selection Guide JFET Input Bipolar Input CMOS Input FDAs Power Amps VGAs TIAs Introduction: Bipolar-input…

  • OPA835: Error in spice model

    Part Number: OPA835 Other Parts Discussed in Thread: OPA2834 , TLV9052 , , TINA-TI Hello, We are working on a circuit where we are evaluating several operational amplifiers, both from TI and other vendors. The devices we have been looking at include the…

  • RE: TLV2171: Faster settling time than TLV2171 Amp Recommend

    The OPA2992 has 0.3 µs. There are high-speed op amps like the OPA2834 or LMH6643 with less than 0.1 µs.
    • Answered

  • OPA2170: ADA4692-2 Cross

    Resolved
    Part Number: OPA2170 Other Parts Discussed in Thread: OPA2834 , TLV9062 , TLV9052 , TLV9002 Hello, I am working to cross the ADA4692-2, and I think the best cross would be the OPA2170 or the OPA2834. Could you please confirm this? Additionally, what is our…
    • Resolved

  • OPA863: Inquiry on the total delay time to achieve 90% of Vcc

    Part Number: OPA863 Other Parts Discussed in Thread: LM7171 , OPA2834 , BUF802 , OPA2863 Hello TI, I have been working on the opamp OPA863 and have a concern on the time delay to achieve 90% of Vcc. My application is high speed buffer. My question is: 1: Is…
    • Answered

  • RE: Recommend an amplifier with lower noise at low frequency to replace OPA2348

    Resolved
    You might look at the OPA2834, not RRin but much lower 1/f corner and better CMRR if the input is in range.

  • OPA836: What's the Ib value when the device is low-power mode

    TI Thinks Resolved
    Part Number: OPA836 Other Parts Discussed in Thread: OPA837 , OPA2834 , OPA197 Hi team, My customer is evaluating OPA836 in a water meter project. This project cares about the power consumption very much. Customer found OPA836's Ib is as below: This…

Didn't find what you are looking for? Post a new question.