Part Number: OPA330 I am having a little difficulty understanding the impedance specifications. The data sheet for the OPA330 does not list any impedance values.
I did read a post in E2E that explained that you could calculate the common-mode impedance…
Part Number: OPA330 Other Parts Discussed in Thread: OPA376 , OPA191 Hi All,
can anyone please let me know, what is the absolute max differential voltage for the part OPA330AIDBVR .
As per the Figure 17 of the datasheet it appears the anti parallel diodes…
Part Number: OPA330 Other Parts Discussed in Thread: TINA-TI
Tool/software: TINA-TI or Spice Models
Hi all,
Sorry for asking such a basic question but how does noise analysis work in TINA?
Below is the filter circuit I am trying to do the noise analysis…
Part Number: OPA330 Hi all,
Recently I have been testing the two filters that I have designed in the lab however I don't get the same results as the simulation
in TINA and I can't work out why. Below are the two filters and AC responses in TINA…
Other Parts Discussed in Thread: OPA330 , OPA333 , INA826 , INA152 , INA333 Hi,
Is possible to use the OPA330 to measure the voltage drop in a resistor when the GND of the input is different to the GND of the OPA voltage source? How must I connect it?
Tha…
Kevin,
First, OPA330 maximum supply voltage is specified at 5.5V BUT you seem to use +/-5V - that is a total of 10V! If you have done this, the part is most likely damaged. You may use max single supply +5.5V or max dual supply +/-2.75V but not +/-5V…
Part Number: INA827 Other Parts Discussed in Thread: OPA330
I am using the INA827 to drive a 5kg FMZK loadcell. And despite thinking we have the equations calculated correctly and our resistors set etc we are not seeing an accurate reading on the loadcell…
Other Parts Discussed in Thread: OPA330 All,
I need the mechanical info for TI's OPA330 in XBGA (YFF) package. Package dimensions 'D' and 'E' are missing from the datasheet (sbos432e). Any help will be greatly appreciated.
Thanks…
