Part Number: OPA336 Other Parts Discussed in Thread: TINA-TI I am running a simulation and in the process trying to validate the OPA336 PSpice model but in LTspice. Seems I cannot match the open loop gain shown in the data sheets with my AC sweep simulation…
Part Number: OPA336 Hi Team,
We received a request from the customer about the information regarding the Common-Mode Input Voltage Range of the OPA336 over temperature. Ideally, she prefers the graph of the Minimum and Maximum Common-Mode Input Voltage…
I duplicated the circuit you have in this thread and TINA cannot find the DC operating point. The previous circuit I used found the DC operating point but the Bode plot looked nothing like the one in the thread.
The current circuit(no operating point…
Other Parts Discussed in Thread: OPA336 I am trying to use OPA336 spice model in PSpice. I tried to follow instructions given in http://www.ti.com/lit/an/sloa070/sloa070.pdf
I have added the opa336 library to the configuration file as well.
I am getting…
Paul,
Adding a resistor in series with the output increases capacitive drive of any op amp as it tend to cancel a pole created by the output impedance and load capacitance. Since OPA336 is designed to drive around 300pF in a unity gain (see below),…
Other Parts Discussed in Thread: INA321 I am trying to make a simple ECG amplifier using INA 321 and OPA 336. I am driving this amplifier using a an ECG simulator(http://www.heinstruments.com/ecg-simulator.htm), hence I do not have a right leg drive circuit…
Other Parts Discussed in Thread: OPA336 , TINA-TI Hi,
I'm trying to make a biopotential amplifier. The first stage (instrumentation amplifier) should have a gain of 5. The second should be a noninverting amplifier with a gain of 100. How can I make…
Part Number: INA331 Other Parts Discussed in Thread: OPA336 , INA351 , LM7705 , OPA333 Tool/software: For instrumentation amplifier, INA331, this is being used as differential amplifier with R1 = 100K digipot and R2 = 100K. From DS, this indicates that…
Part Number: ADS1204 Other Parts Discussed in Thread: OPA336 Hi,
We are using the ADS1204 to acquire single-sided signals on the positive side inputs. Can we connect REFOUT directly to REFIN and all negative side inputs (CH A-, CH B-, CH C-, CH D…
