Hello D,
1) I found in DS of OPA360 page6 ( Enable/Shutdown) section
"If the Enable pin is not connected, internal pull-up circuitry will enable the amplifier."
But it is probably better to tie it to 3.3V
- I agree, you may float it but I recommend…
Part Number: OPA360 Dear TIer,
When we aging test,output vedio is abnormal in different time periods arise.When we touch OPA360,problems will arise.
Just like the picture as below.
We A-B-A swap to test.Problem is still exist.Passing board is still normal…
Hi d.,
From a performance perspective, the OPA360 operates at an internal gain of 6dB while the OPA361 operates at and internal gain of about 14dB. Also, OPA361 has a lower quiescent current (5.3mA vs 6mA typical).
The OPA360 also has an internal sag…
Part Number: OPA361 Other Parts Discussed in Thread: OPA360 Hi Team, Customer originally uses the OPA360, and customer would like to switch to OPA361. OPA360 has the pin3 SAG function to reduce the output cap.
OPA361 do not has the SAF pin, OPA361 has the…
Other Parts Discussed in Thread: OPA360 Dear Sir,
Is it possible to use OPA360 for CVBS 1 in 2 output ? or is there any way to duplicate the signal to 2 port output? Thanks.
Other Parts Discussed in Thread: OPA360 Hi,
I am using OPA360, Rin is 75ohm. When we tested burst vecor, it can't pass. So we change Cout to 220uF and be floating SAG(remove 22uF). It can pass the test. Do you have any good suggestion? Can I float the…
Other Parts Discussed in Thread: OPA361 , OPA360 There is a TV Detect on the OPA361 datasheet.
Has anyone tried this using OPA360 (I need for different gain requirement).
Patrick
Hi Nishie,
Thank you for your question. My primary recommendation would be the OPA360 . It has similar features including the 6dB fixed gain, 2nd order filter, SAG pinout, shutdown, and is in a small-size 6-pin package.
Thank you, Rachel
Hello Kygo,
I would suggest the OPA360 or the OPA361. Both devices have internal fixed gain (OPA360 has 6dB, OPA361 has 14.3dB), sag correction, filtering, and around 8MHz bandwidth.
Thank you,
Sima
