Part Number: OPA364 We bias the noninverting input pin of an OPA364 from 3.3 V dc through 23 kohm/10 kohm voltage divider. We place a 100 nF filter capacitor across the bottom resistor. This is similar to CDIV in Figure 31 in datasheet SBOS259F. When power…
Part Number: OPA364 I don't see an indication on the datasheet for the OPA364 orderables P/N with A before the packaging designators.
Any difference between OPA364IDBVR and OPA364 A IDBVR?
Thanks!
Part Number: OPA364
Hi,
looking for documents on opamp stability and TINA TI modeling, I have found a good article by Tim Green (part 2 of his series about stability) but I have some points that I would like to clarify to me.
In the article, a simple…
Part Number: OPA2364 Other Parts Discussed in Thread: OPA364 , , OPA4991 , OPA2991 , OPA991 I am trying to model a circuit using this op amp in PSpice for TI. On the product page I've linked, there is an option to download the OPA364 PSpice model, which give…
Part Number: OPA364 Hi Team,
My customer received from a paid order an OPA364 device with part marking OPA 364 K (Picture below). Looking at the datasheet and part marking lookup tool "K" is nowhere to be found. Can you share with us the meaning of K…
Part Number: OPA277 Other Parts Discussed in Thread: OPA364 , OPA4325 , OPA4277 , OPA325
I am planning to measure the 12 current from different hall sensors. The fundamental current the hall sensor is 400Hz and have harmonics upto 15KHz. The hall sensor…
HI Kenneth,
Its been a while since we heard from you. I am assuming your issue was resolved, hence we will close this post out. Feel free to start another post, if you have any other questions.
Part Number: LMC6482 Other Parts Discussed in Thread: ADS1219 , , LM7705 , OPA364 , OPA320 Hi,
I am using the LMC6482 as a buffer amplifier in front of an ADS1219 ADC. When the non-inverting input of the LMC6482 is connected to GND, the output voltage is…