Part Number: OPA376 Other Parts Discussed in Thread: TLV376 , , LM7705 , OPA340 Hi Team,
customer has done some simulations with OPAx376 and TLVx376 in LTspice.
They noticed that the output does not go below 10mV for both devices.
Would you know…
Part Number: OPA376-Q1 Other Parts Discussed in Thread: OPA376 Hello, checking per the datasheet for the OPAx376-Q1 states that this OPAx376-Q1 comes in the SC70 package
Sadly I was unable to find the orderable PN that is this package. It is not listed…
Part Number: OPA376-Q1 Other Parts Discussed in Thread: LM7705 , OPA376 , OPA392 I have a question.
In typical current sense amplifier use, how much would its accuracy be?
I would like to compare to DRV871x current sense amplifier accuracy.
Part Number: OPA376 Please check and inform can we use OP-Amp part no: OPA376AIDCKR by connecting +3.3V and -3.3V as working voltage as in specification, it was mentioned as 2.2 to 5.5V or ±1.1 to ±2.75V .
Part Number: OPA376 Please check and inform can we use OP-Amp part no: OPA376AIDCKR by connecting +3.3V and -2.1V as working voltage as in specification, it was mentioned as 2.2-5.5V or ±1.1-2.75V .
Also Annie,
I was a little concerned about noise with those high R's, here is an SNR assuming a 4Vpp max out of the OPA376 (1.41Vrms) not too bad, above 110dB SNR
Part Number: OPA376 Hi Team,
I'd like to do a bandpass filter using OPA376.
Which center frequency is 150kHz and the 3db bandwidth is 20kHz.
If it could be a 2 pole active bandpass filter?
Would you recommend how to design the circuit?
Thanks…
Part Number: OPA376 Hi TI experts,
I met an issue when using OPA376, circuit is configured as below:
Supply voltage is 3V and GND, Vref is 400mV. signal source VG1 is a normal sine wave with hundreds of uV level.
when I connect voltage source…
Part Number: OPA376 Hi
We are using OPA376 to do low side current sensing for battery pack. We build 1000 set using below circuit and see 50 pcs does not work correctly. With replace new device on OPA376 the bad unit work correctly. We are wondering…