Good morning,
I used OPA552on my card with the following characteristics:
Vcc 9 to 25Vdc
G ain x10, non-inverting
Vin 0.5Vdc with Vout 5Vdc or Vin 1.25Vdc with Vout 12.5V or Vin 2Vdc with Vout 20Vdc
Iout 200mA
The VCC changes along with the…
Other Parts Discussed in Thread: OPA552 , OPA548 Dear Team,
I am contacting you to get some precisions on the datasheet of the OPA552 and the gain in an open loop.
For VS=+/-30V
126dB in DC and 40dB at 125kHz
When you look at the plot of the…
Other Parts Discussed in Thread: OPA552 , OPA551 , OPA445
Dear Sirs
My customer use OPA552 as a modified Howland current pump. (like the following two figure)
They give the input voltage (+Vin) and get Iout.
But the linearity is bad near 0uA.…
Other Parts Discussed in Thread: OPA552 , OPA551 , OPA453 , OPA547 , OPA452 have design an amplifier with the OPA552FAKTWT and have a problem with it,as it start oscillation have a non inverted amplifier with negative feedback ( 2 resistor ) Can you help…
Other Parts Discussed in Thread: OPA552 , OPA445 Hello,
I'm Malela . I use the OPA552 for a amplification board . i got 2 stages: a follower voltage and a non inverter amplifier(gain1.5).
I got a problem on the output of the follower stage: there…
Other Parts Discussed in Thread: OPA552 , OPA551 , UA741 Hello all,
I have a problem cascading a OPA552 followed by a 741CN.
When I apply 18.009V to the input of the 741 voltage follower I get 18.009V at its output.
However, when an input of…
Other Parts Discussed in Thread: OPA551 , OPA552 Hello ,
I use the OPA551 and the OPA552 on my trial board. I have OPA551 in non inverting mode for a gain =2. The supply voltage =+/-25V and the input signal =+/-4V. If the input frequency is lower than…
Part Number: INA296A Other Parts Discussed in Thread: INA225 , OPA552 Tool/software: The power supply turns on with a pulse of 1usec. Is there any current sense amplifier or operational amplifier that can measure the current value when it turns on?
Part Number: OPA1633 Other Parts Discussed in Thread: TINA-TI , JFE150 , OPA552 , JFE2140 , PSPICE-FOR-TI Tool/software: Hi, i´m looking for PSPICE models for the OPA1633. We are using LTSpice and it´s realy urgently. Many thanks for your effort.
BR…
