Part Number: OPA593 Tool/software: HI , see the sch , is it OPA593 can work at vcc=12v and vee=-52v , input -19.68v , and want to get -19.68v*2.3= 45.246V , is it ok ? thanks.
Part Number: OPA593 Tool/software: Hi,
I am using an OPA593 as a buffer (unity gain).
The op.amp. is not oscillating. , however I observed a high current consumption (more than 50mA from 60V) even with the input connected to GND.
Any idea why?
Part Number: OPA593 Tool/software: How fast is OPA593 responding to a change on E/D pin? I am looking to generate 500us current pulses (using a Howland pump implemented with OPA593) and contemplate the idea of switching the output ON/OFF using the E/D…
Part Number: OPA593 Tool/software: Hello team,
My customer is considering to use OPA593. However, they would like to use in supply voltage of 90V (+/- 45V). The recommended supply voltage range is 85V, so this use case is outside of that range.
Customer…
Part Number: OPA593 Hi amps team,
A customer is looking for a class D amplifier, that can cope with a voltage swing of 15-25V.
Currently the OPA593 is selected, however it is rather large in size.
The amplifier will drive the load with a sinusoidal…
Part Number: OPA593 Tool/software: Hi Teams,
When the chip has input and power, when the enable is turned off, the output end will produce such a particularly high voltage drop to zero. How to improve？
BRs,
Ruoxin
Part Number: OPA593 Other Parts Discussed in Thread: ALM2402F-Q1 Tool/software: Hi,
The condition of OPA593 are as follows. V+=+14V , V-=-14V , E/D=Enable.
If OUT pin exceed 14.3V during 117.6ns , is OPA593 safe ?
Out pin Voltage in lightning surge…
Part Number: OPA593 Other Parts Discussed in Thread: OPA992 , OPA990 Hi,
I'm using OPA593 as a unity buffer for my motor application. I have seen in the datasheet that there will be a 0.7V diode drop in the output in page no - 24.
My application…
Part Number: OPA593 Tool/software: I am considering what happens when a system loses power, and the power rails collapse. When this happens I don't want any output voltage.
I intend to detect power failure with a power monitor and use the PGOOD output…
