Part Number: PGA205 Other Parts Discussed in Thread: OPA192 Hello,
We are trying to integrate the PGA205 IC in an amplifying circuit - the scheme is attached below.
We encounter issues from an unknown source, any help will be appreciated.
The circuit…
Part Number: PGA205 Other Parts Discussed in Thread: PGA280 , PGA281 Hi team,
My customer is looking for cost optimum alternative of PGA205.
Input voltage is approx. 20V. Gain needs to be switched to G=1 and G=4.
My initial thought is PGA280.
…
Part Number: PGA205 Hello,
Regarding to PGA205, my customer is asking some question.
Currently, they are checking PGA205 on their board and face noise issue.
(Please refer below.)
They confirmed other frequency(14kHz,20kHz) in addition input…
Other Parts Discussed in Thread: PGA205 Hi
We want to know general usage of PGA205.
1. Pin 6 and Pin7 are Vos Adjust pins.
How to use these pins?
2. Pin 1 and Pin 9 are Vo1 and Vo2.
How to use these pins?
If you have a good reference…
Other Parts Discussed in Thread: PGA204 , PGA205 Hi! I assembled PGA204 and PGA205 on my board. It worked properly for few minutes and then crashed. More exactly the amplification gain is less than one now. Then I tried two new ones and assembled them…
Other Parts Discussed in Thread: ADS1259 , PGA112 , PGA205 , PGA280 , PGA281 Hello,
I'm using the TI ADS1259 to measure the voltage of a li-ion battery. The ADS1259 datasheet recommended using a PGA 204/205 for an input buffer. I will only be measuring…
Hi ,
The minimum temperature stated in the data sheet for Operating, Storage and Absolute Maximum Ratings is -40 ° C for all three parameters. This does not seem correct. What are the correct temperatures?
Thanks for your help.
Regards,
John …
Other Parts Discussed in Thread: PGA281 , PGA280 , PGA204 , PGA205 Any suggestions of what part I can replace PGA280AIPWR with. I can't get the part but the time need is sooner than when it will be available
Part Number: PGA204 Other Parts Discussed in Thread: PGA205 Hi Team,
Can the PGA205 be used with a single ended input? I looked in the datasheet to see if there was an application circuit for this use, but did not see one.
If it can be used with a…
