Part Number: PLL1708 Other Parts Discussed in Thread: CDCE813-Q1 , CDCE6214 , CLOCK-TREE-ARCHITECT Hi team,
Cirrus Logic has EOLed CS2100CP-CZZR.
Do we have a newer alternative for this IC?
PLL1708 seems to be a close IC but this is very old.
…
Part Number: PLL1708 Hi Support Team.
In the Qualification Summary, the results of ESD-HBM and CDM are described as "See data sheet". However, the datasheet does not show the results of ESD.
Please tell me ESD data (HBM data , CDM data) of PLL1708DBQR…
Part Number: DIT4096 Other Parts Discussed in Thread: PLL1708 , PCM1808 Tool/software: Hello,
I have made the project from the Schematic added here. Created a PCB and after powering it on it seems that it doesn't work. After reviewing several times…
Hi Matt,
I looked around for a part that might match the CS2100, but I didn't see anything that seemed like a similar function. The closest I could find is the PLL1708, but this is a clock generator from a known master clock rate to multiple sampling…
Hi Mahen, PLL170x can only be configured as stated in the datasheet. However, the device is able to output 24.576 MHz on SCKO1 (PLL1708). Best regards, -Ivan Salazar Texas Instruments
Part Number: CC2640 Other Parts Discussed in Thread: PCM1808 , , PLL1708
hi,i use pll1708+pcm1808 to sample audio and BCLK,WCLK output from pcm1808,does cc2640 i2s wokk at slave mode,and how to config BCLK pin,WCLK pin if it can.
i set initialize…
Other Parts Discussed in Thread: PLL1708 Hello,
In our product AIC23 is connected to McASP port of DM642. The codec is configured as a slave device, using DSP mode. McASP is a master and generates LRCIN, LRCOUT, BCLK. McASP uses external clock, provided…
Other Parts Discussed in Thread: DIR9001 , PCM1794 , PCM1794A , PLL1708 , TS3L110 Hi,
Im planning to feed my PCM1794A with I2S data. I want to switch the I2S Signal with an 74HC157D 2-input multiplexer. As far as I see the PCM1794 uses the clock source…
Other Parts Discussed in Thread: PCM1794 , DIR9001
Hi,
Im planning to feed my PCM1794A with I2S data. As far as I see the PCM1794 uses the clock source from the I2S Signal. Now when I switch the Sources the Clock also changes. Is that a problem or…
