Hi Salazar-san,
Thank you for the reply.
> Is this happening every time you open PPC3 and load your config file?
Yes, this is happening every time.
> As in the previous post questions, are there other applications running? Only TAS2555EVM is connected…
Part Number: DRV8462EVM Hello team,
What is the Max PPS setting, which is possible on the GUI of this EVM?
Some motor driver EVM has limited PPS due to onboard MCU spec.
Best Regards, Kei Kuwahara
Part Number: USB-PD-CHG-EVM-01 Other Parts Discussed in Thread: BQ25798 , TPS25751 , TPS25750 , USB2ANY Hello,
I used the USBCPD Application Customization Tool to create a .bin for my EVM. What works well is that the PD controller advertises 5 PDOs…
Hello Arthur,
Bingo! Thank you for your bright insight. Now our SALB2 is worked stable at 1.8V IOVdd setting.
I hope to see reference Jumper setting on TAS2563 SALB2 EVM manual document.
Our customer plan to use TAS2563 SA for portable audio EE…
Hi Mike,
The flow I would recommend is:
1. Generate configuration script with CodecControl 2. Convert that script into the format used by SystemSettingsCode in PPS 3. Compile and run PPS on EVM, no other configuration needed
The miniDSP code is…
Hello,
Dawid Weglarz said: At the moment we have the TPS26750EVM as we tough it could be a good candidate for the dummy and also replace the TPS65987 on the main (which don't have PPS): Dawid Weglarz said: If they are other components that are more…
Hi Mir,
I tried the .pfw file you shared with the exact hardware configuration, but the onboard microphone still isn’t working.
Separately, I attempted the digital-mic interface using two approaches you suggested:
Direct PDM → analog channel…
Hi Michal,
Michal Bajkacz said: When the master clock is disconnected the ptp4l still works and looks for the master clock so according to the note stopping and starting again the PPS signal should not be required.
Thanks for confirming, let me check…
Other Parts Discussed in Thread: TPS65987DDKEVM 부품 번호: TPS65987DDKEVM
Dear TI Support Team Manager, 1. Project Goals We are building a USB PD 2.0 power supply system that supplies 20V/3A to portable PCs. *System Configuration:*: Power Supply 20V → …
Part Number: AM2432 Hi,
I was trying to change the PPS signal frequnecy (cycle time) on the R5F Core 0 of an AM243x EVM for the PRU ICSSG.
I modified the value of ICSSG_IEP_DFLT_CYCLE_TIME_NSECS from 1000000 to 25000. The PPS signal frequency was…
