Part Number: PROCESSOR-SDK-AM68 Other Parts Discussed in Thread: AM68 , AM67 Tool/software: Hi Expert,
Does AM68 support Chromium?
Is there any comparative data available for reference?
Thanks
Daniel
Part Number: PROCESSOR-SDK-AM68 Other Parts Discussed in Thread: AM68 Tool/software: Hi Expert,
Does the AM68 SDK support OTA?
Is there any document I can refer to?
Thanks
Daniel
Hi Mohammed,
Mohammed Niyas said: Does this mean that only one microphone can be directly connected through the available I2S/McASP1 signals on the 40-pin header?
Yes, unless you daisy chain the microphones.
Mohammed Niyas said: However, I want…
Part Number: PROCESSOR-SDK-AM68 Other Parts Discussed in Thread: BEAGLEY-AI Tool/software: I'm facing a very similar situation as is on this post on an EVM board I bought last week: https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers…
Hi,
This thread appears to be a duplicate of this one: https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers-forum/1349101/processor-sdk-am68-encountering-board-detection…
Hi, 1. Connecting via Minicom vs. Setup Script: Yes, I can connect to /dev/ttyUSB2 directly using Minicom, but when running the setup script, I'm unable to establish a connection to /dev/ttyUSB2. 2. Logs on /dev/ttyUSB2: Unfortunately, I'm not receiving…
Part Number: PROCESSOR-SDK-AM68 Other Parts Discussed in Thread: AM68 Hello,
Using the SDK9.0 image on the AM68 starter kit, we end up with a display driver error when we try to initialise it, below are the MCU2_0 logs.
[MCU2_0] 175.968553 s: src…
Part Number: AM68 Other Parts Discussed in Thread: TDA4VM Tool/software: I am trying to figure out from the documentation if it is possible to run openCL against am68 and tda4vm. From previous posts in this forum I found this link: https://git.ti.com…
Part Number: SK-AM68 Other Parts Discussed in Thread: TDA4VL Tool/software: What's the proper way to derate the MMA for the TDA4VL on the AM68-SK with SDK 10?
For SDK 9, I have done this: `k3conf set clock 8 0 500000000`.
This fails if I run SDK 10…
Hello Rishad,
Rishad KP said: While checking out some documents on TI website I got to know that this processor has a MCU domain, Can this mcu run custom code?
The MCU domain on AM68 is closed for custom use. Please refer to the software SDK roadmap…