Hello,
I am trying to get my AM335x EVM up on NFS. I have connected the EVM to a Linux Laptop with static IPs.
After playing around with several uboot configs: I am able to get to the point where I can complete IP-Config for eth0 port. However, NFS…
Part Number: CC2640R2F
IAR + Autosized heap workaround
This workaround applies to all using BLE(5)-Stack + TI-RTOS Runtime Object Viewer (ROV) for IAR with OSAL heapmgr and autosize.
Note ROV2 for CCS is not affected. This issue doesn't affect cc13x2_26x2…
Other Parts Discussed in Thread: CC3200 , CC3200SDK I am trying to detect when a computer connects to my cc3200 via wifi. To do this I am trying to use the SimpleLinkWlanEventHandler. To set up the code I am doing:
void main(void) {
long lRetVal…
Other Parts Discussed in Thread: ENERGYTRACE , CC2650 , MSP430F5529 , MSP430FG4619 , UNIFLASH Hi everyone,
this FAQ addresses the most common questions one might have about the new MSP432™ MCU. The main topics currently covered in this FAQs are:
…
Has anyone has succes running the v3dfx d emos on a DM8168?
I have encountered several errors when I attempt to run the required scripts and the demo app.
root@arago:/opt/v3dfx # ./routeFb1toHDMI.sh VPSS_GRPX : please open fb1 node first. VPSS_GRPX…
Part Number: AM5708 Hello,
I'm doing a custom board based on AM5708 device. Im' building with Yocto processor SDK 06_03_00_106 which is based on kernel 4.19. My custom board has NAND device for storage.
I would like to verify IPU/DSP IPC example…
Part Number: ADS124S08EVM Other Parts Discussed in Thread: ADS124S08 Hello,
Ive attached a Type-K thermocouple to the AIN2, and AIN4 Terminals of the ADS124S08EVM after it has been modified to work with an external Linux processor. See below Specs…
Other Parts Discussed in Thread: AM4378 Was attempting to use the following combination to debug a TI-RTOS example for a AM4378:
- CCS 6.1.1.00022, running under Linux (CentOS 6.7 64-bit)
- The TI-RTOS based I2C_Example_idkAM437x_armExampleProject…
Part Number: CC2540 Other Parts Discussed in Thread: CC2541 , Introduction
In the BLEv1.2 release, support for Production Test Mode (PTM) has been added, allowing a BLE application in a "single-chip" configuration to temporarily expose the HCI over…
Hi
I am getting error while installing omaplfb.ko driver.
i used OMAP35x_Graphics_SDK_setuplinux_3_01_00_07.bin
I tried different SDK versions but resulting same.
The ouput is pasted below.
root@beagleboard:/etc/init.d# ./rc.pvr.2.6…
