Dear Swarnendu,
Thank you for your response.
For our 60 GHz application, we are focusing on short-range sensing in the following areas:
Motion and gesture recognition for human–machine interaction
Human detection and vital sensing in close…
Part Number: AWRL6844EVM Other Parts Discussed in Thread: AWRL6844 , INA228 , TPS2121 Hello TI team,
I am developing a custom product board using AWRL6844. Our prototype uses the AWRL6844EVM, but we are now estimating the cost of a new radar-only…
Part Number: AFE34RF90 Hello Team,
Would you let me know my inquires below?
Please let me know Ordering Corde description
I would like to know option corde of AFE34RF90TCEVM, and AFE34RF90EVM-20G.
Is my understanding correct what the following…
Hi Nishant,
I'm surprised you haven't been able to verify the gain. Starting out with G=1 or changing the gain could be good to debug your setup. How far off are you from your intended gain? What results are you getting?
All the DC parameters are…
Hi Jerry,
If OPA3S2859 is kept in single supply mode with INA+ biased at +3.4V, for no input current, the output of OPA3S2859 will stay at 3.4V. For any current into the TIA from photo diode, the Output will behave with this relation: Vop = (3.4 - I_photo_diode…
Hi, Liang:
We have never used radar simulator nor VBOX. We would really need you to provide more information about the setup. Such as:
Is TI radar used in this setup? If so, how the transmit signal from radar signal sent to radar simulator (waveguide…
Part Number: AWRL6844 Tool/software: Hello Everyone! There is a technique used to compensate for frequency mismatches in case of cascaded designs (Chapter 4.2 and 5.1.1 here /cfs-file/__key/communityserver-discussions-components-files/1023/signalPrcesssing_5F00_userguide_5F00_4chipCascade…
Hi Pouria,
Pouria Pazhouhesh said: The object was placed at three distances of 20cm, 48cm and 1m and 30cm, 59cm, and 1.13m were estimated by EVM.
What is the range resolution?
Pouria Pazhouhesh said: What could be the possible reason for seeing…
Hi,
240 MHz is not a specified operating frequency, but it is within the synthesizer's tunable range. The distinction matters:
Source
Range stated
Datasheet (additional supported band)
205 – 237.5 MHz
CC1200 User's Guide…
My apologies, I've got some clarification.
1. Yes, you are correct the Sensing Estimator does not take burst accumulation into account. We know it is not fully implemented.
If numChirpsAccum affects RF Duty Cycle depends on how you define RF Duty…