Thanks again, Pedrhom. While the NDA is in progress with legal since yesterday, a few questions so we can plan for AOP dataset:
What in it: raw ADC data, point clouds and tracker output, or processed model features? Which board revision, firmware…
Hi Gabriel,
Sorry for the delayed response.
I was able to build the lab successfully through CCS. Could you please guide me on the best way to make changes to the HECR.h file in order to improve both range and resolution?
For example, when I make…
Good morning, I hope this message finds everyone well.
I'm working on a new project where I'm studying the use of the BQ34Z100-R2 IC to estimate the quality of life of a battery by measuring its internal impedance and load parameters. However, after…
Hi Rabina,
Just as I said, one LP8868-Q1 cannot handle that power range, especially for 6V input. How much temperature rise can you accept? You could use the calculation tool to get the estimated temperature rise.
Best regard,
Suchen
Hi Ahanaf,
Board revisions: - DCA2000EVM: PROC202 Rev. A - AWR2188EVM: PROC203 Rev. C
Silicon on the AWR2188 is ES2.0 (matching ROM + patch firmware, confirmed during bring-up).
1. Near-realtime capture
Understood, thanks for confirming there…
Hello Nitesh
Thanks for your reply and in-depth analysis.
Would some series resistance connected between the converter output and capacitor help to limit the soft-start current? E.g. 100kΩ series resistance would limit the peak charging current into…
Part Number: TLC27L4B Dear
I am writing to you regarding the component in question, part number TLC27L4BIDR, to bring to your attention a serious technical issue that is impacting the production of one of our
We look forward to your prompt response…
Hi,
If your customer wants to improve the range, they can use either the CC2590 or CC2592 range extenders in conjunction with the CC2540. A few references are available, which can help them make their decision.
Using CC2590 with CC2541: https://www…
Part Number: OPA2991 We are designing a 6-channel active analog output board using OPA2991IDR.
Application summary:
Supply to OPA2991IDR: 12 V single supply
DAC input signal: 0 to 2.5 V
Op amp configuration: non-inverting gain stage…