Answered

• SN65HVD233-EP: ibis file vih, vil doesnt match datasheet

  

  assaf matia

  Resolved

  Part Number: SN65HVD233-EP Other Parts Discussed in Thread: SN65HVD233 Tool/software: Hi, in the ibis file (for sn65hvd233) the vih, vil of driver in (D) is vih=2.4V, vil=0.4V in the datasheet for both sn65hvd233 and sn65hvd233MDREP the vih id 2V and…

  • Resolved

  • 11 months ago
  • Interface
  • Interface forum

• SN65HVD233-EP: Test failure_Customer side troubleshooting resulted from this part

  

  Kai Wen Yang

  Part Number: SN65HVD233-EP Hello Team, We received a complain from our customer: x9 out of x9 PCAs that we built failed the test. (Who is dedicated to oil energy services.) After troubleshooting, the failure is from PN: SN65HVD233MDREP. The test was passed…

  • over 3 years ago
  • Interface
  • Interface forum
Answered

• SN74LVC1T45-EP: SN74LVC1T45-EP

  

  Evgeny Vaintraub

  Resolved

  Part Number: SN74LVC1T45-EP Other Parts Discussed in Thread: SN65HVD233-EP , , SN74LVC1T45 Tool/software: Hi, I use Can Bus transceiver PN - SN65HVD233-EP which is connected through a level converter - SN74LVC1T45-EP to FPGA , as shown in the attached drawing…

  • Resolved

  • 5 months ago
  • Logic
  • Logic forum

• SN65HVD233-EP: Storage Temperature

  

  Renan Santos Adriano

  TI Thinks Resolved

  Part Number: SN65HVD233-EP Hello Team, Can you share with us the Storage Temperature of SN65HVD233-EP? This information is not in the datasheet. Regards, Renan

  • over 4 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD233-EP: CAN BUS PROBLEMS

  

  VICTOR BEST

  Resolved

  Part Number: SN65HVD233-EP CANBUS PROBLEMS: LOOKING AT TRAPPING ERRORS THAT OCCUR ON THE CAN LINE: I HAVE SEEN A PAPER ON USE OF COMMON MODE CHOKES TO REMOVE SPIKES FROM THE CAN LINES, WHERE DO THESE SPIKES COME FROM? EACH CAN DEVICE HAS ITS OWN TERMINATION…

  • Resolved

  • over 5 years ago
  • Interface
  • Interface forum

• SN65HVD233-EP: CAN BUS PROBLEMS

  

  VICTOR BEST

  TI Thinks Resolved

  Part Number: SN65HVD233-EP CAN BUS INTERFACE: SN65HVD233HD - BEST PRACTICES WHEN USING CAN NETWORK ? HAVING ONE PAIR OF CAN DEVICES THE SYSTEM EXHIBITS NO COMMS ERRORS, AS SOON AS WE ADD THIRD OR FOURTH CAN DEVICE NETWORK FAILS (SUPPLY=3.3V). HARDWARE…

  • over 5 years ago
  • Interface
  • Interface forum
Answered

• SN54AHC157: Inquiry related to military rating

  

  Jung Snaghoon

  Resolved

  Part Number: SN54AHC157 Other Parts Discussed in Thread: SN65HVD233-EP , SN55HVD233-SP , SN65HVD233-HT , SN55HVD233-SEP some parts are confirmed to have a military rating through TI's website. For 'military rating' parts posted on the website, is there…

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum
Answered

• SN65HVD233: Die versions of the HT, Q1 and EP grade version of the SN65HVD233

  

  Ikechukwu Anyiam

  Resolved

  Part Number: SN65HVD233 Hi Team, Can you help to address this customer's question about whether or not the HT, Q1, and EP grade version of the SN65HVD233 have the same die? https://e2e.ti.com/support/interface/f/138/p/746420/2757529#2757529 Regards…

  • Resolved

  • over 6 years ago
  • Interface
  • Interface forum
Answered

• SN65HVD233: Need Model Simulation (IBIS Model) for SN65HVD233-EP

  

  sina kamkar

  Resolved

  Part Number: SN65HVD233 Hello, I need IBIS Mode for SN65HVD233, is there it ? I would Simulation this Devices in The HyperLynx 9.4 Simulator. Thanks for Attention.

  • Resolved

  • over 8 years ago
  • Interface
  • Interface forum

• SN65HVD233-EP: failed part and want to contact the support of TI but don't know the contact email

  

  Li hongsheng

  Part Number: SN65HVD233-EP Hello all. I have sent email to support@ti.com. have not get response after 10days. i just like to know is that a correct email or any email I can contact?

  • over 7 years ago
  • Space & High Reliability (Read Only)
  • Space & High Reliability Forum (Read Only)

Didn't find what you are looking for? Post a new question.