Search tips
Showing 13 results View by: Thread Post Sort by
    Answered

  • SN65MLVD203: Is there failsafe circuit in the Receiver Input ?

    Resolved
    Part Number: SN65MLVD203 Other Parts Discussed in Thread: SN65MLVD207 Tool/software: Dear Specialists, My customer is considering SN65MLVD203 and has questions. I would be grateful if you could advise. --- Regarding SN65MLVD203 (1) Is there…
    • Resolved

  • SN65MLVD203: Unused pins

    TI Thinks Resolved
    Part Number: SN65MLVD203 Hello E2E, What is the proper configuration of the unused pin11 and pin12 of SN65MLVD203? Can we keep it floating? Regards, Carlo
    • Answered

  • SN65MLVD203: theta JC,top

    Resolved
    Part Number: SN65MLVD203 Hi Team, A customer is interested to know if this part can be top cooled? If so, what is the thermal resistance for the top side? Thanks!
    • Resolved
    • Answered

  • SN65MLVD203: Glitch on low frequency transitions

    Resolved
    Part Number: SN65MLVD203 Other Parts Discussed in Thread: MLVD20XEVM Hi, I'm seeing a small (~10-20 ns) additional output pulse when transitioning from high-to-low or low-to-high with the SN65MLVD203 transmitter and receiver used as a pair. The setup…
    • Resolved

  • SN65MLVD203: LVDS or M-LVDS under the customer's condition

    TI Thinks Resolved
    Part Number: SN65MLVD203 Hi, My customer wants to communicate data under the following condition. Length : >=20m External cable Bit Rate : 150MBps Which does he use LVDS or M-LVDS? Please let us know your recommendation. Thanks and best…
    • Answered

  • RE: SN65MLVD203: Using dummy loads in unloaded slots on the backplane for uniform and consistent loading of the bus

    Resolved
    Hi Dennis, You shouldn’t have the 100 Ω termination (terminations only at both ends of the bus or backplane, not in the intermediate slots). Instead you should have a resistance that emulates the input impedance of the an M-LVDS receiver, which is…
    • Answered

  • MLVD20XBEVM: interfacing type 1 MLVDS to type 2

    Resolved
    Part Number: MLVD20XBEVM Other Parts Discussed in Thread: SN65MLVD203 I'm wondering if it is possible to interface a type 1 MLVDS with a Type 2. In particular, I'm looking to use this dev board from TI attached below to pass CMOS through the SN65MLV204AD…
    • Resolved

  • RE: SN65LVDS180: VOD to 500~ 600 mV

    Hi Sirs, Thanks for your reply. When I'm testing Display Port, the Aux Channel Eye Test (Source) was fail, please refer eye diagram as below, Looks TI_SN65LVDS180PW Differential output voltage is not high enough, so does TI have DP Aux Channel…
    • Answered

  • SN74AVC2T244: Rise and fall times

    Resolved
    Part Number: SN74AVC2T244 Other Parts Discussed in Thread: SN65MLVD203 , 2N7001T , , SN74AXC2T45 SN74AVC2T244Dear Sirs I'm interfacing a 1.8v output FPGA to a 3.3V MLVDS system that will be running at 100MHz. I plan to have the 1.8V FPGA output feed…
    • Resolved
    • Answered

  • RE: Non Isolated RS-485 vs Isolated RS-485

    Resolved
    Isolation University.xlsx Matthew, I have attempted to include an excel sheet from the Isolation Department's ISO University. It contains several links to collateral explaining isolation and it's applications. If the attachment failed, type "iso/…

Didn't find what you are looking for? Post a new question.