Search tips
Showing 6 results View by: Thread Post Sort by

  • SN74AUC2G125: SN74AUC2G125/SN74AUC1G125 bus frequency

    TI Thinks Resolved
    Part Number: SN74AUC2G125 Other Parts Discussed in Thread: SN74AUC1G125 , Hi Team, My customer would like to check the bus frequency the SN74AUC2G125/SN74AUC1G125 can support. Will these devices support 50M? Best regards Ella

  • RE: SN74AUC2G125: YZP package damage - impact on funcianality

    Hi Jakub, Here is an app note that covers this package and all of the reliability testing it went through: www.ti.com/.../sbva017.pdf
    • Answered

  • SN74AUC1G125: Vih/Vil Specification at VCC=1.0V

    Resolved
    Part Number: SN74AUC1G125 Other Parts Discussed in Thread: SN74AUC2G125 , SN74AUC125 , SN74AUC244 , SN74AUP1G125 , SN74AUP2G125 Tool/software: I find out SN74AUC1G125, a tri-state buffer with output enable that works fine at VCC=1.0V. However, the Vih…
    • Resolved
    • Answered

  • SN74LVC2G07: SN74LVC2G07

    Resolved
    Part Number: SN74LVC2G07 Other Parts Discussed in Thread: SN74AUP2G125 , SN74LVC2G125 , SN74AUC2G125 Hi, We are using the ADC which supports 3 wire SPI communication and we are using SPI level shifter which will convert the 4 wire SPI communication…
    • Resolved
    • Answered

  • RE: SD card redriver/buffer

    Resolved
    I assume D0-D3 are bidirectional signals (read/write), and CLK/CMD are unidirectional signals, only going out to the SD card. I would recommend using 2 devices, an SN74AUC244 provides up to 8 channels of direction controlled buffers (the direction…
    • Answered

  • RE: Level shifter for jtag from FET to RF430FRL152 with SN74LVC2G125 and SN74AUC1G04

    Resolved
    Alberto, If you are concerned on the Vcc spec, I would recommend to use this part: SN74AUC2G125. Vcc on it is above 1.5V but it is still accepting of voltages of up to 3.6V. The SN74LVC2G125DCTR part is not showing any problems in this application…

Didn't find what you are looking for? Post a new question.