Answered

• SN74AUP1T34-Q1: SN74AUP1T34-Q1

  

  mark zeid

  Resolved

  Part Number: SN74AUP1T34-Q1 Tool/software: What is the maximum frequency of a clock signal. it would be a 2.5-->3.3 up conversion

  • Resolved

  • 1 month ago
  • Logic
  • Logic forum
Answered

• SN74AUP1T34-Q1: VOL(Max) Concern

  

  Connor Connaughton

  Resolved

  Part Number: SN74AUP1T34-Q1 Hello Team, I had a datasheet question pop up. We are using the SN74AUP1T34-Q1 voltage level translator, and I’m trying to understand the VOH and VOL levels from section 6.3. Specifically where there might be concern is the…

  • Resolved

  • over 3 years ago
  • Logic
  • Logic forum

• SN74AUP1T34-Q1: Part marking discrepancy: U4J vs U4E

  

  William Mackin

  TI Thinks Resolved

  Part Number: SN74AUP1T34-Q1 The Features section on page 1 says the maximum tPD at 3.3V is 3.7ns. We have some parts in stock that are simply labelled "U4J" on the part. They were in the bin for the SN74AUP1T34QDCKRQ1. The datasheet for that…

  • over 3 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP1T34-Q1: whether the part support signal direction from high voltage to low voltage

  

  zhipei zhang

  Resolved

  Part Number: SN74AUP1T34-Q1 Other Parts Discussed in Thread: 2N7001T , SN74AXC1T45 in datasheet, there is only introduction about the application of signal from low voltage to high voltage. please tell if it support the voltage reduction case.

  • Resolved

  • over 6 years ago
  • Logic
  • Logic forum

• SN74AUP1T34-Q1: Max data rate

  

  Darren Jenkins

  TI Thinks Resolved

  Part Number: SN74AUP1T34-Q1 Logic team, Our customer is using SN74AUP1T34-Q1 for a 100 MHz signal over -40 to +85C. Vin is 3.3V, Vout is 1.8V. It's working fine in the lab, but they want to know if this is within the acceptable range of operation for…

  • over 6 years ago
  • Logic
  • Logic forum

• SN74AUP1T34-Q1: Jitter Performance

  

  xingqiao liu

  TI Thinks Resolved

  Part Number: SN74AUP1T34-Q1 Hi, Could you please share the jitter performance for SN74AUP1T34-Q1 with me if you have this information ? Best regards, Liu Xingqiao

  • over 7 years ago
  • Logic
  • Logic forum

• SN74AUP1T34-Q1: About the status of the output when the input is floating.

  

  Charles Jeon

  TI Thinks Resolved

  Part Number: SN74AUP1T34-Q1 Hi team. The customer requests data about the status of the output when the input is floating. for example, if A is floating when input status, how is B status ? Customers want products that are equally floating. Additional…

  • over 6 years ago
  • Logic
  • Logic forum

• SN74LV1T34: auto version for this part

  

  James Zhan

  TI Thinks Resolved

  Part Number: SN74LV1T34 Other Parts Discussed in Thread: SN74LVC1T45-Q1 , SN74AUP1T34-Q1 , SN74AHCT1G125-Q1 Hi team, Do we have auto grade version for SN74LV1T34? By the way, could we use sn74lvc1t45-q1 to replace it? Thanks.

  • over 3 years ago
  • Logic
  • Logic forum

• RE: SN74LVC1G14-Q1: clipped sine wave (0.8Vpp) to CMOS level transfer

  

  Clemens Ladisch

  At 20 MHz, the signal edges are 50 ns apart. The TLV3201-Q1 has a propagation delay of up to 50 ns. The TLV3201-Q1 does not run at 1.8 V, but no fast comparator does. You need a separate buffer to shift the comparator's output down to 1.8 V, e.g., SN74AUP1T34…

  • over 5 years ago
  • Logic
  • Logic forum

• SN74LVC1G11-Q1: Voltage Logic Level

  

  Nitesh Kumar74

  Answer Suggested

  Part Number: SN74LVC1G11-Q1 Other Parts Discussed in Thread: SN74LV1T08 , SN74AUP1T34-Q1 Hi Does the I/O volatge level depend on VCC of SN74LVC1G11-Q1. Regards Nitesh

  • over 8 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.