Answered

• SN74AUP2G08: How much negative voltage can the input port withstand?

  

  li chen3

  Resolved

  Part Number: SN74AUP2G08 Tool/software: I am using the AND gate chip SN74AUP2G08DCUR. Due to circuit design problems, the input port has a negative voltage exceeding -1V. The SN74AUP2G08 datasheet shows the input clamp current parameter(VI<0, IIK -50mA…

  • Resolved

  • over 1 year ago
  • Logic
  • Logic forum

• SN74AUP2G08: SN74AUP2G08 power assumption

  

  Sammi Shang

  TI Thinks Resolved

  Part Number: SN74AUP2G08 Dear team, Customer has questions on how to measure the assumption of SN74AUP2G08. From the datasheet, I see ICC 0.9uA as static power assumption, so can I regard this ICC as the assumption when work in steady state? Also…

  • over 6 years ago
  • Logic
  • Logic forum

• SN74AUP2G08: SN74AUP2G08 1Y OUTPUT as channel 2 input

  

  Sammi Shang

  TI Thinks Resolved

  Part Number: SN74AUP2G08 Other Parts Discussed in Thread: SN74AUP1G97 Dear team, Could you kindly help confirm if it is OK that the output of channel 1 as the input of channel as below schematic shows? Thanks. Best regards, Sammi

  • over 5 years ago
  • Logic
  • Logic forum

• SN74AUP2G08: Output pin's Current Consumption

  

  Jim CHEN

  TI Thinks Resolved

  Part Number: SN74AUP2G08 Dear Team, My customer would like to use SN74AUP2G08 on their system design. But they have concern about the output current consumption. They thought mA level is too large for their system. uA level should be better. So…

  • over 6 years ago
  • Logic
  • Logic forum
Answered

• RE: SN74AUP2G08: IBIS models

  

  Eric Kim- DSS

  Resolved

  Hello Jon, Thanks for your interest in TI's part. Unfortunately, there is no IBIS model existing for the device. If IBIS model is critical, I recommend you contact your local TI representative for model creation request. Thanks, -Eric Kim (DSS…

  • over 7 years ago
  • Logic
  • Logic forum
Answered

• SN74AUP2G08: SN74AUP series parts consume more power than expected

  

  Todd Shelton

  Resolved

  Part Number: SN74AUP2G08 I am using multiple parts from the SN74AUP family to implement some logic that is powered from a battery source. I have included two SN74AUP2G08DCUR, two SN74AUP2G32DCUR, and one SN74AUP3G04DCUR in my design. I had expected the…

  • Resolved

  • over 6 years ago
  • Logic
  • Logic forum

• SN74AUP2G08: SN74AUP2G08DQER: X2SON – DQE Footprint query

  

  PRAHLAD Supeda

  TI Thinks Resolved

  Part Number: SN74AUP2G08 In SN74AUP2G08 datasheet page 1, there is a thermal pad shown in DQE package diagram. But in page 19 of datasheet, there is no thermal pad shown, please share whether thermal pad need to be provided, if yes share dimension details…

  • over 9 years ago
  • Logic
  • Logic forum

• SN74LVC1G11: Alternate part required

  

  Premalatha Royappan

  TI Thinks Resolved

  Part Number: SN74LVC1G11 Other Parts Discussed in Thread: SN74AUP2G08 , SN74LVC2G08 , Hi We are using SN74LVC1G11DRYR in our design. Kindly suggest a equivalent alternate part for this.

  • over 3 years ago
  • Logic
  • Logic forum

• SN74AUP2G07: Stencil design for 0.35mm Pitch SON

  

  Xiaowei huang

  TI Thinks Resolved

  Part Number: SN74AUP2G07 Other Parts Discussed in Thread: SN74AUP2G08 Hello, we found different stencil designs(opening and thickness) recommended on data sheets of SN74AUP2G07(6-pin SON, 0.35mm pitch) and SN74AUP2G07(8-pin SON, 0.35pitch), see images…

  • over 3 years ago
  • Logic
  • Logic forum

• SN74LVC1G08: is there C value limitation between output (Y)pin - GND?

  

  Masaharu Takahashi

  TI Thinks Resolved

  Part Number: SN74LVC1G08 Other Parts Discussed in Thread: SN74AUP2G08 Hi, All i've been asked by Customer below. 1.Is there any C value limitation customer can place capacitor between Y-GND pin? if so how much is it? what customer tries to…

  • over 6 years ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.