Part Number: SN74AVC2T45 Other Parts Discussed in Thread: SN74AXC2T45 Hello, My customer would like to use SN74AVC2T45 as 1.8V to 3.3V level shifter for a 50% duty cycle clock, not data stream Datasheet says max data rate for 1.8V to 3.3V is 500Mbps,…
Part Number: SN74AVC2T45 Other Parts Discussed in Thread: SN74AXC2T45 Hi All,
I have a question about SN74AVC2T45.
As shown in the data sheet below, there is a delay time, but is there a difference in the timing when B1 and B2 are output? I want to…
Part Number: SN74LXC2T45-Q1 Other Parts Discussed in Thread: SN74AXC2T45 , TXB0102 , TXB0304 Can I know what is the output rise and fall time or slew rate of the device at 1.8V supplies and 50pF cap load. I am also looking for a buffer/ level shifter…
Part Number: SN74AXC2T245-Q1 Other Parts Discussed in Thread: SN74AXC2T45-Q1 I'm using the SN74AXC2T45-Q1 to translate from +1.2V to +0.9V (B to A direction) and I would like to operate at 125 Mbps. I have been able to operate at 25 Mbps. For the +1.2V…
Part Number: SN74AVCH2T45 Other Parts Discussed in Thread: SN74AXC2T45 Hi,
When i connected refrence clock from ethernet PHY(AR8031) - 2.5V to i.MX 8 SoC - 3.3V my baord is getting crash and memory issue is coming.
If i connected refrence clock directly…
Are there long traces, cables, or connectors? I suspect that the system violates the limits described in sections 8.3.3 and 8.3.5 of the datasheet.
For unidirectional signals, a unidirectional or direction-controlled level shifter (e.g., SN74AXC2T45…
Part Number: SN74AXC2T245-Q1 Other Parts Discussed in Thread: SN74AXC2T245 Hi,
We are using CAXC2T245QRSWRQ1 in our design for level shifting of voltage from +3.3V to +1.8V. We need to perform SI analysis.
The models found in sn74axc2t245.ibs are…
As shown by the I BHHO specification, the SoC pin must be able to sink 125 µA to switch the I/O pin from high to low. But 1.84 V / 33 kΩ = 55 µA.
If you do not want the translator to hold its pins at the last voltage, use a device without the bus-hold…
