Let me answer my own question: Yes, the SN74CBTLV1G125-Q1.
I need training on how you find this device on Ti's website as the only way I could find it was to google for the term: LOW-VOLTAGE SINGLE FET BUS SWITCH automotive.
Thanks
Hi Bin, SN74LVC1G3157-Q1 does have the bilateral diode structure on S and D of the MOSFET. For select pin, it doesn't have similar ESD structure. I guess you ask this question because you will have the case when Vcc = 0 while S or D is not 0V. And it…
Part Number: SN74CB3T1G125-Q1 Other Parts Discussed in Thread: SN74LVC1G07 , SN74CBTLV1G125 Hi
It is recommended that the following output is open drain IC SC70-5 SMD 3.3V Or a single bit switch with OE# pin SC70-5 IC?
PD resistor would only limit the output current through the pin. Also your design has two USB-C receptacles. USB-C spec does not allow devices with receptacles on both sides. A USB receptacle should present its own termination on the CC pins. If you are…
Steve Wilson,
I use Linein(1) and MIC3 in Document(file p.22)
You can see just one DOUT, but you mean that I can control DOUTL and DOUTR??
I couldn't find the DOUT control register....... How can I control DOUTL and DOUTR??
What I understood…
Part Number: TMDSOSKL137 Other Parts Discussed in Thread: TLV320AIC3106 Tool/software: Code Composer Studio Hello, I'm again.....
I'm using TMDSOSKL137 [[[ using TLV320AIC3106 (Audio codec)]]] for sound separation system.
I found just one DOUT…
Hello,
Thank you for bringing this to our attention. TMDSOSKL137 technical documentation and software is located at the link below and should not require a login. Please let me know if you are able to access it.
http://www.spectrumdigital.com/omap…
